Type: Posts; User: moe7404
great and rap can NOT go together.
it depends on the engine. it reacts a lot like torque converter the power going in changes how much slippage it does. i just locked mine up solid.
split con rod? normal
sorry iam 62 i dont do pics. just make them like the stock ones only longer. then if they are to long cut them back with your dreamel. and use zip ties to hold it to the a-arms, youll need 2...
i made sway bars out of 1/8" music wire, but make them longer than stock, and i used zip ties to hook them to my RPM arms. and used traxxas 3931 screws to bolt them in the middle if the frame
integy has an an al trans case t8002s. dont know much about it.
well moe is a short form of my first name, morris. 7404 is a inverter chip i use on computers to show data movement.
you cats on this site are the coolest. i dont post to much cause iam still new at rc. i come up with outrageous ideas. one i just finished is making the slipper clutch locked up, ie NO slipping....
ok well spelling wasnt my strong point back in the 50s, i barely got out of high school. please cut an old guy some slack.
iam in the middle of making my slipper clutch locked up. its not done yet. i do NOT recommend it as mine isnt done yet.
no you need an engine NOT a motor, just kidding, i like engines
no the rod that pulls the break. toss the spring and the hose. get a aluminum or brass tube .124 od. cut it to .60 long. put where the spring and hose was. and readjust.
on the break rod toss the spring and fuel hose get a get a aluminum tube to go over the rod, make it .6 long. and readjust.
you just have to learn to drive a high horsepower truck. there are lots of mods you can do, but i advise take mods slow. better yet do no mods.
if your fuel is above the carb the fuel will drain in to the carb. take the air cleaner off and fill the tank, if the fuel drains into the carb you might have a hard time tunning it.
hot racing, for a dual brake. you will need it. learn to know when its getting out of shape, to avoid a crash, ie take i easy at first. and start on pavement. it is much cleaner than off road.
in 1999 the epa made the automotive oil makers remove zinc from automotive oils. diesel oils still have zinc. check out "bob is the oil guy" site.
sorry i forgot i live in the past. before the slot cars got to be stupid fast, there was about 4-5 makers of motors. no standards. so we would take the motor apart and remove 3-5 windings from...
two things: 1. bump up the voltage. 2. dewind the armature
rewire the ez-starter to run off of your street truck battery. been doing it for over 2 years, no trouble. if you are running high % of nitro try using some gasoline it start it. gasoline has...
if ANY fuel is above the carb it drain into the carb, flooding it out.
thats good to know. is there metal gears for the jato?
i spend as much money as i can on r/c. so my #2 son wont get as much money, when i die. LOL
you might like a O.S. 11k(18tm) 21982000. its all metal, 3 adjustments, a true bolt on to 3.3. not sure about power. have put on 2- 3.3s no trouble.
yep i have some of them. go to rb mods. i have an idea that its caused by to much rpm. but some tell me no. so your guess is as good as mine.