Search:

Type: Posts; User: fuzion

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. lol.. you can just use an erevo axle with its...

    lol.. you can just use an erevo axle with its knuckle... hold it by hand and let the wheel rotate freely :p
  2. first run. ...

    first run.

    https://uvur1q.dm2304.livefilestore.com/y3m-Wjb3AB-G4aQp5_4fSh2Ehsi--Bc2u4EAN9quKiPxAEn7sXl0eZ--3QfdCPAxRof5WoQqd3aUOg4i1eJGjzfZ8pfMMA1huGqSclvAmP ...
  3. Thread: Servo?????

    by fuzion
    Replies
    6
    Views
    244

    i recently bought a hitec HS-7955TG as i read...

    i recently bought a hitec HS-7955TG as i read around that they are not so power hungry, titanium gears and more than sufficient power-torque. anyways all the good brand servos cost approximately the...
  4. Replies
    6
    Views
    447

    there is no next stress point in my experience,...

    there is no next stress point in my experience, under these circumstances the aluminum bulkhead will gradually bend upwards.
  5. completed the basic lighting with alarms, and...

    completed the basic lighting with alarms, and make things a bit neater inside with the cables. fan installed on bec and servo.
    ...
  6. to turn on lights you normally need a...

    to turn on lights you normally need a servochannel-to-switch thing that reads the servo channel and has on-off states, and passes through current or not of an external circuit. like a switch to...
  7. okay lets move on. i saw on an older thread here...

    okay lets move on. i saw on an older thread here that the contacts for the 5 channels are there on the transmitter, just not connected to any switch. good news - i can connect lights or anything.
    ...
  8. Replies
    258
    Views
    35,292

    i can send you spare plastic losi diff cases if...

    i can send you spare plastic losi diff cases if you want to scan and not buy.
  9. i cannot edit again now.... again wrong....

    i cannot edit again now....

    again wrong. these are not the tra5354x traxxas posts
    i will try to find them again.
  10. the rocker screw is a traxxas upgrade to titanium...

    the rocker screw is a traxxas upgrade to titanium screws with blue safety nuts. its stock traxxas item

    edit. wrong... they are aluminum but stronger than stock steel. i dont remember where i got...
  11. Replies
    258
    Views
    35,292

    if you scan the bulkheads and diffs i d like to...

    if you scan the bulkheads and diffs i d like to have the files :)
  12. teaser: ...

    teaser:
    ...
  13. my somewhat finished battery tray. put some soft...

    my somewhat finished battery tray. put some soft tape on the bottom and sides, and screwed velcros to hold it down. it has been held with worse methods, this will be more than fine
    ...
  14. all in. temporarily. too much preload on this...

    all in. temporarily. too much preload on this pic, that is with the softer springs.

    ...
  15. The silicone spray magic So the truck was all...

    The silicone spray magic

    So the truck was all brown. after disassembly, i washed all plastic parts with water, dish soap, and a shoe brush.

    but when they dry, they look too grey and dirty...
  16. bulkheads and diffs... this was my setup...

    bulkheads and diffs... this was my setup initially:
    ...
  17. no big interest here huh? :P anyway. i used...

    no big interest here huh? :P

    anyway. i used 50wt and the strongest springs, variable damping pistons, P2 rockers, inner rod positions. seems very nice and tall like this, returns well on up...
  18. there are some "hobbyist" hex tools that are...

    there are some "hobbyist" hex tools that are really sharper and take out all screws really well no matter how hard or loctited. i d suggest you buy 2-3 sizes
  19. Replies
    615
    Views
    402,609

    Sticky: https://hufn6w.dm2304.livefilestore.com/y3mwe4gFso...

    https://hufn6w.dm2304.livefilestore.com/y3mwe4gFsoJH0-hIjT1jPxTApglStLNbBPBv9ce-ORGH-9PRwKR0ZYswQ0P3jFmfGSDUFwX8s-rxm7fNPZPNq6bI0UrNrYUutdmNTd1Jfdqk8sCYjU3XF9TskF_gUxgFn-TSa27TSXkf6QoiNWnLa7lE8K8KouD7...
  20. i think i will keep the battery doors to create a...

    i think i will keep the battery doors to create a nice space for the battery, and hold it down with a velcro or something.
    ...
  21. man that setup was years back i dont even have...

    man that setup was years back i dont even have the parts. i think i just used a larger pinion, nothing much. i ll check the spare parts bag. i also never had decent batteries for speed runs so max i...
  22. lets start with a brand new chassis, off those...

    lets start with a brand new chassis, off those disassembled ebay revos... (metallica on the background)
    ...
  23. my rebuild project - after years of no action

    Hey all. I decided to do a small log just to pass the time while performing a small rebuild on my erbe.

    its been sitting for years in the storage room... left it as it ran for the last time on...
  24. i have played with the revo using 3 different...

    i have played with the revo using 3 different styles. pure street, pure mt and fast track style with light dirt tires (badlands). all 3 equally fun. i dont know if you can do anything else with the...
  25. i didnt break skids so often. i think aluminum is...

    i didnt break skids so often. i think aluminum is overkill and heavy, where you can avoid it. i had the skids but went back to stock
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4