Type: Posts; User: Newmodman
the 2-speed from the jato looks like it would almost match up and bolt up with the N. sport diff local?
Thanks for the help
my LHS says I should upgradethe top shaft in the diff, does this help or have any basis?
what did you use for sway bar material?
1.} I got 2.5R N.sport and the spur gear keeps melting at the center near the pegs and the only way to stop it is to crank the nut and spring all the way on, I tried switching out the 72-tooth with...
I got the n.Sport cause I wanted a good starter to the nitro hobby and I was a little stapped for cash, the n.sport was a good fit!!
the pro.15 was great motor, now i have the 2.5R motor and the...
I got those same ones on my rusty and they work great, nice traction specially on dirt!!!
But I want to go bigger tyres and rims like a t-Maxx rim and tyre, some one told me I could use the slash...
i mounted the jato fronts with zip tiesto my rpm bumper and the a-arms, the rear is zipped to the rear diff and shock tower with the links to the rear a-arms, but sometimes they pop out of the links....
in that first tread does anyone have an idea were he might have put his batt pack? (zipped to the front)
You could always bolt it to the rustler body with plastic and rubber washers!
I bought the jato sway bars for my Rustler just becauseof the same problem. it comes with three different bars (soft,meduim,hard) for front and rear.
I got the rear on there with some moding and was...
I bought an xbox360 elite for the sake of its likely hood of getting the RROD being slim to not, and also cause sony (and the PS3) was so crapy enough not to play my 100's upon 100's of dollars of...
there for rc truck and cars
Has anyone tried these????
how would you install them???
Its just easier, less time consuming and cheaper to paint and gloss the outside of the body!!!
if you like painting grafixs or layers on your car its alot easier, alot easier!!!
I use my nitro sport all year long!!!
and with the new 2.5r it will see it first winter, that should be fun!!!
Is there any jato parts fit(or with a little moddifing)the Nitro rustler?????
Also a good rollcage?????
Would you believe I replaced the fuel lines still did it,,,
so I bought a bigger fuel filter with prime,,,,
And the F******* thing runs perfect!!!!!
All broken-in man this 2.5R just...
I replaced all the fuel lines and it still did it , then I bought a bigger fuel filter.
and the thing runs prefect now?????????
So freaking strange!!!!!!
Thank you all for the help
the engine the carb it all brand new, Itried the fuel lines replaced them all fuel flows like it should, I flushed the carb and tank it still idled just fine but as soon as i gave throttle it died.
i'm not messing around i'm replacing all the fuel lines..
Thank you for the help
I'm following the manual break-in process, Standard glow plug, traxxas 20% fuel, I put needles back to factory.
I noticed with tank1 no blue smoke, begin of tank2 same no blue smoke and I noticed...
idle screw is at the fatory setting, I have to try it!!
the engine is brand new, but i'll flushing the fuel system
I upgraded my nitro sport/Rustler hybrid with Brand new 2.5R engine, add a fuel filter, repacked the diff.
and I started the break-in process, Tank 1 ok no problem, Tank 2 problem it wont stay...