Type: Posts; User: liltony910
I have the HR servo saver. I am using a STRC single servo saver arm. Could the arm be whats causing the problem?
How tight should I leave the slipper clutch? I am going with the HD kit and i have a dewalt with 17/68 gearing installed.
I am planning on upgrading the slipper clutch in my summit. Should i go with the traxxas heavy duty upgrade, kershaw designs slipper or use the hot racing upgrade?
Its a hitec 7955 servo with a aluminum servo horn and servo saver. There is no binding when the servo is turned off. They do turn to both sides when powered the only thing is that it won't fully...
I have a problem when I turn left and release the steering the servo doesn't return the wheels to the center. If i turn right there is no problem. What do you think is causing this?
I'm in the process of converting to a single servo steering. I purchased the servo saver from hot racing. My question is if i should use the stock spring or the spring that came with my new servo...
Thanks. Also to waterproof a traxxas lipo battery what do you recommend?
I am planning on applying plasti dip on my Hitec 7955 servo. Should I cover cover the whole sides of the servo or should i avoid covering the aluminum on the sides?
Thanks for your help.
How many bearings are needed from each size. Also would they be the same size for a st racing server saver?
What size are the bearings, or where can i order them?
Does the servo saver come with bearings or does have to be purchased separate?
Will this servo arm fit the above servo saver? http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXTTL7&P=7
Is this the servo saver? http://www.integy.com/st_prod.html?p_prodid=2785&p_catid=73#.UizglMu9KSM
I plan to use this Hudy servo horn. http://www.amainhobbies.com/product_info.php/cPath/61_101_2515_2517/products_id/165734/n/Hudy-Machined-Aluminum-Single-Arm-Servo-Horn-Black-24T-Hitec
I am planning on upgrading my steering system to a single servo. I have already decided to use the hitec 7955. What other parts do i need to order to do the upgrade?
Besides the servo what else is recommended to change or upgrade to acheive a single servo steering system?
Has anyone tried the savox SA1283SG?
Are there any non beadlock wheels that fir the mudslingers?
I have a set of mudslingers will the servo provide enough power to turn them?
What is the best servo for a single servo upgrade without adding an external bec?
I finally decided my self and just ordered mudslingers for my summit. Which wheels can be used for these tires and which do you recommend. They don't have to be beadlock. I had in mind the proline...
How well do they work withnthe stock servo? I really don't want to lose any height. How does the trenchers compare to the mud slingers?
Should i get the regular trenchers or the trenchers x? I do mainly bashing in the grass and some gravel. I rarely climb rocks and go mudding occasionally. Which type will suite me better I'm planning...
To find torque multiply the hp of the motor by 5,252 and then divide the answer by motor rated rpm.