Type: Posts; User: CHUMCHAL72
I remember somewhere some guy chopped up the chassis in places and used the extra battery slot and had a link connected through the chassis on to the steering arm
I had the raptor for maybe 2 weeks not strong at all
Dang I forgot all that um
Finally got my BB running ow I need to know gearing for 3s or 2s on road speed runs/ on road driving I need a new spur my spur was partly stripped the BB just finished it off
So what do y'all use...
Yea those will work if you run them in parallel your stock esc and motor will get hot even with lowering the gears but I always ran the 23 or 19 tooth pinion with the stock spur
Wowww that ******* **** tech is small I with I would have gotten those
What kind of batteries and you shouldn't run batteries in series in not good for the stock esc just stick with parallel
i think i have plenty air flow lol
Not directing you away from a mini slash just these minis are a pain to work on sometimes and the diffs strip alot with out shims so you might be better of with a rustler or stampede or full size...
decided to use velcro to mount it
and i could mount it like this (i like...
Alot of good info
I'd like to see how y'all mounted your sv2 cause I got mine in today and gonna install tomorrow if my other parts get in and I'll be using the Velineon 3500 :))))
Ok I mean yea I'm go wanna fly down the street like a speed run but im gonna wanna go from on road to light off road the same run
Yes zip tie the rockers in it works really good just don't leave it there to long your shocks might start to get smaller by being compressed
What gearing should I use
Chould the stock spur and pinion work
Or is it that under powered or overpowered
I'm looking not for speed runs but for drivining around and off roading with dirt hawgs...
I land in tall soft grass
Upgrade the esc that would be the best thing like my esc just went out and I ordered the sv2 even with that esc you will see more speed with the stock motor
I made the mistake with the servo my...
I'm just glad I got my car running again it's been down for a bout a month and a half but now it will be faster and that means bigger jumps if you have seen my jumping video this next one will be...
Ok so I ordered the SV2 and the big block motor plate and mount and I have a Velineon at home waiting to be installed except I forgot to order 3.5 bullet connectors hope the hobby shop has them
I made my own aluminum wing it worked fine
I'm not looking to spend any extra money on battery's I just wanna get my car running and go fast it's broke down right now. I was just wandering cause I could get the combo for $100 or I could just...
If I get the sv2 and 4600 kv motor will I be able to power it enough with 2s 2200 mah 20C or a 3s 1800 20C
I have the new bulkheads and still use 3 shims
Which big block mount do yall use im not sure to use the
HR 540 conversion
Tenbol big block
Which one do y'all like/dislike