Type: Posts; User: Lordsilas
i figured that might be the problem. i just wasn't sure. nearest overhead powerline are about 1/4 to 1/2 mile away. i have a 2.4 and stronger steering servo on the way so hopefully that will solve my...
i was running a stock 3906 the other day when it started to drive itself. braking slowed it down but didn't completely stop it. i managed to catch it and get it shut off. when i plugged the...
i'm wondering what my decently used slash 4x4 could be worth.
rpm arms all around
brand new rpm rear bearing carriers
rpm nerf bars
very nearly new vxl 3s esc( 2 runs on it for about...
would $60 be a reasonable price for a used evx-2 with 2 550 titans? seller says it has about 10-15 runs on it.
you should be able to gear the pede 4x4 9/54 without modding. you'll still need those fans though as the vxl doesn't like long term 3s use.
the slipper is what your spur gear is attached to and also connects to the drive shaft.
you over heated the motor and fried it. probably time to replace it. try this.
no i just meant i needed a few more of this battery.
it's is and it's def making me spend more money than the vxl setup.
i have mip's on the rear but after than way i ran it this week i can imagine i'll need them on the front soon. it's also tried eating one of my wheels after a nut came loose. i think the only thing...
CC Sidewinder SCT 3800
gens ace 2s1p 5000mah 40c
proline 1972 chevy c10 body
unless you live somewhere cold 14/54 is going to overheat the velineon system.
do you think you could also velcro tape it to the sides of the esc or do you think heat would cause it to peal off?
i think either traxxas vehicle would be easier to maintain. i believe there are fewer parts on them over the flux. also the flux uses 2 batteries at a time over the traxxas vehicles that only need...
looking good!! :)
i broke mine on the first weekend i had mine and i'm sure many others have too. that's the nature of these fun little beasts.
this is looking interesting. don't know what kind of modding you'd have to do but it might be what your looking for.
i think the 30 series trenchers are pretty big on the pede and give it plenty of gripin the rough stuff.
if you do get a vemon lipo do yourself a favor and get a local hobby shop(or do it yourself) and solder a traxxas connector to the battery wires. venoms universal connectors don't stay together very...
i'd go with lipo if you haven't bought another charger already. they're no more difficult to use and charge than nimhs. just do a little research on charging lipos and you'll be good. a decent little...
would you like some truck to go with your tires? lol
also make sure your getting the grub screw on the flat part of the pin. i know when i first put them together i wasn't paying close enough attention and the pin twisted causing the grub screw to hold...
metal on metal+loctite= always a good idea
you could also buy a cheap brushed motor with a higher turn count? it might work.
yes there are multiple threads on it in this forum.