Type: Posts; User: redman2
Use the correct pushrods with p2 rockers. Much-o better handling.
EPA= End Point Adjustment
It is the adjustment at the end of the servo's travel. Turn the wheels all the way to one direction and it could be too far. This (epa) will stop the servo's travel...
BTW guys, those are RD Racing axle carriers on Tim's truck. 8mm axles
His name is Damon. I race him in the Northwest Championship Tour. TONS of torque but seems to self destruct every once in a while. He also runs a thumper GT2. His Revo is pretty trick. He had to...
If your truck has a lot of time on it then I would check the shifter in the trans. If the alum. is smashed then it will not shift properly. Pull the shift "finger" up and scrape the alum around it...
The stock parts last a long time and are very cheap to purchase.
Good post, maybe more will learn.
Try Panther Pythons! Toughest tire out there and they hook up awesome!
The cons are that it cracks around the motor mount area, Traxxas stock works great.
The pros are that the manufacturer of it gets paid.
Joe, the problem with the alum. skid is that it cracks easier than the plastic/stock skid. Once it wears a little it will crack where the plastic will wear a lot before it happens. Plus, the alum...
Maybe the clutch bell is rubbing on the spur gear/mounting screws. I had a stock scluth bell be deeper than another and it caused it to rub.
they work great!!!
check the rear bearing, if its whinning or noisy during idle then its time for a new one, may also just be a little lean.
Stick with the 3.3, plenty of power and lightweight as well!! Plus Traxxas warranty and tech. service!
the sleeve is going to be tight! that is a GOOD thing!!!
You can either cut them off with a hobby knife or soak them in accetone. If you soak them chrome will be removed also.
Skinny from XRC was disqualified from a pro series event from Carlton Epps for using one on his cars. Somthing to think about.
Mailman, closest to the chassis.
8 port, not true, they will fit on 40 series wheels without modification. In fact they are a tighter fit and glue up easier. Cutting the width of the tire helps in steering and makes them feel more...
The BEST Revo tire is a Panther Python on a cut down Pro line Wabash wheel!! Soft compound is #1
you know if it was 200'F and still had good power just leave it! Nothing wrong with making your motor last longer!!!
I had 3 gallons on my majestiskid, they work great!
GTv7, obviously use the Traxxas manual for break-in. That said, I use a heat cycle method to break in my motor. Put some tin foil around the head to keep the temps up while running the first 2...
Roy, thinking of the Maxx challenge??? Do you check all you equip. and buy fuel there or what? Airlines are pretty tough.
eisted, you can use any radio with any servo. Some just have better performace with better radios or servos. Make sense? the only thing that becomes complicated is mixing receivers with diff....
how come you didn't just use the tm header?