Type: Posts; User: AEklund
I got a Revo 2.5 with a new 18TM - trade
This winter is coming up and the snow will be flying ! Need to get some New batteries and make a new better chassis extension -
Here is the Turning Radius at a slow speed.
Here is My Custom snow Machine ! Running Twin VXL systems and 2 11.1v Lipo batteries. Mounted Dubro Airplane Skis up front and Proline Sand Paws in back. Perfect Conditions is a hard layer of snow...
If i got a track of some type I would just run one motor and have only the suspension in the rear. Having two systems mechanical hooked together would be a disaster.
Still Snowing in Iowa, Hopefully get out and play tom. Wish I could find a track that would work and actually have a paddle to it not just a little 1/8 inch rib
Thanks . . In the second video you can see how deep the snow was. About as tall as the paddles are. Around 4 inches
Countersunk screws our on for the next plate. Glad you guys like it.
Here is a Video w two 11.1v Lipos snow was about 4-5 inches in some spots.
Here is a under chassis shot. I used a old stampede rear chassis brace since its smooth on the bottom instead of having ribs.
Took some Videos this afternoon working on getting them up ! The snow was alittle deep and wet in some spots around 4 - 5 inches
My plan was to try out some Monster Truck tires that is why the wheels are spaced back farther. My next plate will be closer and machined better.
The EVX-2 would be simpler and cheaper, right now...
The EVX-2 would work but I wanted More Power ! I don't buy brushed motors anymore -
Here is a over the top shot and some other nicer pics
Will try and get some Videos today ! A cheaper route would be two XL-5 and decent brushed motors. After running in the snow...
trade you a Slash chassis for your ruslter one ?
Pros - Goes though snow about 3 - 4 inches deep w skis. Crazy power and speed w two VXL systems running 2 11.1v Lipos. Turning radius isn't to bad actually. By removing the bottom 4 screws from...
Just use a piece of Flat aluminum stock. Just a prototype to try out the concept. Next i will get a 6061 aluminum piece milled with the tires alittle closer together. After this winter I will put in...
Here is my 4x6 Slash with Twin VXL systems. Running two 11.1v batteries ! Crazy fast
New Dubro Snow...
I was in the Slash race at Hobby Haven, we had 8 slashes. It was a blast plus i managed to pull off the TQ and Win. Mine was the Blue slash w/o numbers. Thanks Chilly for the picture of my Slash when...