Type: Posts; User: tigersfan45700
ive discovered that i can change the angle of the mount From the manuel-The ideal spur gear/clutch bell gear mesh for
Revo is 0.1mm. To set the gear mesh, place a
strip of standard letter/A4 size...
im still using the stock mount screws though, thought this motor was a drop in lol
So when I tighten the motor mount screws down the motor rises in the mount causing the mesh to be way
to tight, like its difficult to spin, I can get the mesh to have some play but the motor isn't...
Ive been looking online and have found very little about this topic, the reason im asking is radios have built
in fail safes but only with like glitch protection and i want the low voltage...
That first pic is sweet
Ordered parts to start my revo 2.5r picco project :)
o so if i buy the 50010 i dont have to do anything just bolt up? and no im buying everything slowly actually bought the mount
and some other things today
So to clarify If I buy Ofn50007 I just buy a trx one way bearing and put it in the backplate gear ?
Any one have a way to put a roto start on the picco
I seen a thread on it but none of the links for the required
Parts worked and I already have the roto start handheld
Sounds good, is this the mount thanks for the help guys
im thinking the picco supposed to be a drop in should I get the traxxas big block convertion or just the ofna mount you think? i also dont know about the Dynamite pipe or a THS rear mount
could i throw a hpi roto start on it and also im thinking this pipe...
No lol but I get how to except the throttle linkage i just dont wanna put it back together wrong or something
Thanks for the reply the biggest thing I have a question over is the thorttle linkage how to unhook it from the carb and set it
Im stuck on these three engines for my revo 2.5r upgrade/basher build.