Type: Posts; User: aggie rustler
I am looking to buy a battered or broken Slash 2wd roller for a future project - my budget is $50 shipped. Please PM with pics. Thanks.
PL 2012 FordŽ Focus ST Body ^_^
I have just the opposite too much grip and traction rolling with relatively sticky VTA tires. Since the last race, I have installed the stiffer springs #7342 (4.3 rate) and dialed out most camber (0...
My Fiesta with 26mm HPI VTA tires - I know the wheels don't match - :eek:
According to LiveRC coverage of 2011 Cactus Classic:
Lastly, as you may know, Travis Amezcua has recently left TQ and has signed with Team Durango for electric. However, Travis was spotted running...
Great site about setup - especially the Setup Guide
Hm......I did not notice that. I did notice where the steering knuckle hits the caster block at full turn, I notched that out a little. I think I might have gained a mm or two. I have the slash 4x4...
Just last week, I found this handy Gear Wizard App that does all the math for you.
Retraction: I am wrong Mike was not MT Champion, that was Tim Roberts.
Yep, checked out both Steve Slayden's and Mike Battaile's facebook page and they do not list Traxxas as their employer. Mike lists a fuel manufacturer based in San Antonio, TX. Both now list their...
Agreed, one STRC limitation is the Rustler battery tray is pretty small and no shifting is possible (only back with major mods). I just got the PL PowerStroke spring set for the front. Not yet had a...
Same here! I have been struggling with this for a while (STRC/Protrac) same type of track too.
What shock/springs are you using and shock oil weights?
My next step was to try some weight on...
CA glue (crazy glue) used to glue tires to rim. Most people prefer to use a thin variety which is fast setting. Just got to be careful with it, you do not want to glue your fingers together.
Check here you have several options Renegade or Split 6 in black, yellow or white (dyeable) - NOT the Pro-trac versions unless you have the protrac kit.
Other options -
JConcepts Relux and Tense...
Slasher - Slaydaddy has not added to the thread in 6 months.
As far as your question, in the set up he describes, note the ride heights. Just add/remove spacers till your race ready (with battery)...
sorry, wrong forum....edited.
STRC has one, but it requires the use of the Associated clutch system and pinion.
This HD Layshaft allows the use of the Associated slipper clutch system which allows for more consistent slipper...
Ah.....ok, yes, sorry. Thanks for the translation.
Just going off the info of indoor and clay. I am aware of three options (maybe more):
AKA Wishbones - Super Soft
Proline Suburbs - MC (Clay)
JConcepts Barcodes - Gold
Here is my set-up: changes since = 30 wt on F/R, 17.5 Duo3, 76/23 gearing
Yes, they will fit. The 4x4 uses the 2wd rears all the way around, so you will have a slight offset issue on the front.
Yes it will fit. Get the proper bearings to replace the bushings and you will need to dremel a little off the chassis as shown in the instruction sheet from the 4x4 belcrank.
While I agree with 3genracing, metal replacement parts will tend to transfer forces to other parts of the system that might have been weakened over time. Those forces were previously absorbed by the...
I had a set on mine for a while, it handled great with the stock springs and 40wt.
Guys, I am not sure if Steve Slayden still works for Traxxas:confused:. He has not posted in this thread for almost 6 months and I have seen him associated with a fuel vendor along with Mike...