Type: Posts; User: NITR0 newbie
Maybe if you plunge it in a pool but bashing in the snow would not do this........sounds like the slipper is just a little lose
Thought I'd tear up the driveway before shoveling
The guards will fit over the sway bar mounts.
Great upgrade for sure
It is Spaz stix rootbeer backed with pactra orange
I made my own harness to power both fans off the ESC
2.8's on my P4DE on the left and 3.2's on my REVO on the right
Not as much as I spend on my motorcycles.
Stopped keeping track after 3K
Doesn't get much cooler than snow jumping my p2de lol
The rustler mip's are longer than the p4de shafts, too long for the p4de in fact.
I used my grinder to shorten them enough to not bind as the suspension travels through it range.
The reason I...
It works great and is much better at protecting the rear of the body from damage than the stock wheelie bar.
I have gone about 1/2 a mile out and back with traxxas 2.4 fm, cant see a need for much more than that
I have a pair of Venom 2s 5000mah that are going on 3yrs now proly a couple hundred cycles on each.
Sounds like a motor that has been overheated, I did this once.
The glue on the magnets melts and then they spin on the shaft. (no power and a whining sound)
Some people have had success Fixing...
OS21 is expensive but worth every penny
The trx motors "2.5 and 3.3" don't idle worth beans.
Truth is you are lucky if they will idle for more than 10 seconds because they like to load up on fuel and stall.
Big block and mid block...
Tried em at the skate park and they slid like mad on the concrete but it's kida fun as a drifting tire lol
On the hard packed clay at the bmx track they did better than I had expected.
I just use a $10 slash 4x4 rear bumper and put the wheels on it, works great and protects the body from rear impacts
After sitting that long I would check the o-ring on the fuel tank lid, sounds like low fuel pressure to me.
os.21 is a direct drop in and an awesome engine. Uses the stock mount and exhaust.