Type: Posts; User: Daytona952
Never seen a 30 round clip before. But I do have a few 30 round Magizines for my AR-15.
I buy and collect lead all the time. That is a good price for the above 50 Lbs. I melt it down add some antimony and tin to harden it up and cast my own Bullets with it.
Our trucks. Wife drives the red and silver 04 Quad Cab and I drive the 05 Daytona
The Daytona is my project truck. It has been...
Nice choice in music. I hope you don't talk like that. Stop playing with fire you will get burned.
You might want to invest in a good smoke detector in your basement. Good thing you herd the hiss sound before you left the house. I can just see it in my room in the basement as it is half for my rc...
Should have clarified earlier in my post that mine is a M4gery as many call them. Here is a pic of a true M16 /M4 Lower. It is marked with Auto and has the autosear pin hole on it. Some...
No the Military does not allow you to keep your service weapons.
How do you like your Savage?
I am thinking abot getting a 114 American Clasic in .308 soon
It's a Pelican 1700 Case from Cabelas. I used a hot wire cutting table to do all the foam cut outs for a nice custom fit.
Thats some pretty serious hardware ya got there. LOL
Love the AR's guy's post up some more. Here are some of my collection.
My travel equipment. Serious stuff
CMMG AR-15 M4 911 Commemorative (number 1 of 50 made)with Aimpoint comp ML2 Scope, Beretta...
I always use a green pad that the wife has used and worn out.
Next time you might want to lightly scuff the inside of the body with a worn out green pad when you wash it out. Then use a good lexan paint.
Unless your running a brushless motor and 3 cell or more lipo there is no need to tape your tires.
You may have 15.95 volts but no where near the amps to get your slash running. Not even 10 of those cells would make enough power.
I tried to support my local hobby store. But with prices almost twice as high as some of the online stores it is hard to justify their prices. For example Nitro fuel at my LHS is $47.00 per gallon of...
I agree engine detail is a must.
There are plenty of paint jobs in the Slash Gallery that can give you some ideas. It is a sticky post at the top. http://monster.traxxas.com/showthread.php?t=415978
You tuck the extra inside the spring
Just remove the bottom of the shock from the car then you can remove the bottom spring retainer and pull your spring off so you can put the cover on it.
Just as a comparison I have 2 slash's one has the VXL BL running stock gears with a 5000MAH 2s Lipo and the other slash running all stock with a 4600mah 8 cell nimh and they are almost equal in top...
If you add an external LVC it will handle 2s lipos just fine.
Perfect for this comming winters snow bashing.
I see an injector scoop but no blower. Looks great.