Type: Posts; User: Mave
This video was taken quite sometime ago.
The very first batch of the spartan. Love the Sound of it!
This is a freshwater reservior. Has enough length to it to do any high speed run without...
Just spray some lubricant on the rubber gasket(ring) let it soak a while and u should be able to remove it.
I checked. The strut has a bit of slack. Other than that it quite ok. I also change the stuffing tube, seem to reduce the vibration a lot. My next step will be to the shaft to after market shaft....
I would think that the Low voltage cut did come in at the right time.
I suspect that there could be sudden spike in Amp draw that causes your voltage to drop rapidly.
If you have a eagle tree...
Hope you can help me with this.
I lost the shaft in the lake during my second Run. Fortunately I had a spare from traxxas. While testing the new shaft, I notice that the drive train...
Yup, I have the same problem.
What I do now is to plug a separate receiver battery into it. Seems to be working so far.
plugging the servo in reverse will not work
I send the whole boat.I hope I dont have to pay for the return trip.
my friend just fried his seaking 180amp on the spartan running on stock motor. 3 laps of full-throttle, and its gone.
When you are charging the battery, did it get very hot? Was it able to take charge? Does it give false peak?
I can run the stock battery for more than 2 mins at least.
If it is just one battery...
yup, I already bought a 4082/1500kv. :) but just want to experiment with it and try to understand the science behind it.
The motor pump is a good idea but the cost may not be justifiable. What I...
Today was my first run with my Spartan and I hit a
53.4mph on stock motor and stock prop. ( Notice I never mention about stock esc? ;)
I read about failures of the esc. So, since this is my...