Type: Posts; User: bdiddy
tried to re do all settings and still overheating dont have a temp gun but cant touch the motor or esc for more than a couple seconds
tried gearing down to a 18/55 and still overheating on both the motor and esc
i am wondering if it is just the esc that cant handle the 4pole motor
running stock traxxas rx/tx and one servo (hitec hs5085mg) no fan
i have a sv2/4600kv bb running 2x2s2200mah 25c 28/55
whenever i run it is ok half throttle the minute i give it more throttle it seems to lose connection then after a couple of seconds it engages...
both esc and motor are overheating can not punch it off the start due to bad cogging also running the batteries in parallel
my body has holes through it for enough air flow and as for the 20t i would have to order but will try it out
i am running sidewinder sv2 with a castle 1406 4600kv motor with 2x2s 2200mah traxxas lipos also on 2.2 titus headlocks and dirt hawks with 23/55 gearing. My car just seems to overheat within the...
is the motor the cm36 or 1406 castle
already have a sv2 sidewinder esc wondering what motor (kv)would fit with the exotek shocks(48mm max as per exotek) any help would be appreciated
also will be running 2s lipo
just ordered a sv2 sidewinder esc, wondering do i have to get an external bec (heard alot about glitching and servos not working)
will be running the sv2 with stock 380 brushless motor and tx
looking to mount dirt hawgs on either ofna dish wheels or traxxas dish wheels
looking for one that has a little more offset.