Type: Posts; User: kirwinjd
just visually made sure it's still attached to the RX. Any other means of testing to determine problem?
I doubt I got fuel on it.
I could be wrong but I would think a fried receiver would be completely non operational versus just having poor reception.
Any possibility the TX or RX frequency needs...
Hello Traxxas friends,
The TQ 2.4 ghz in my Revo nitro has almost zero range (about 15) and the servos chatter lightly.
I've checked the batteries and receiver antenna. Anything else I can check?...
Ok. After more resesrch I got the answer. I wish there was more clarification as to programming. Apparently, there are more than one model of TQ 2.4 radios and the programming is vastly different.
Ok thanks for the response. I must apologize for not providing enough info.
The radio is in my Revo nitro and it's the servo that is operating in reverse. It's a mystery because when I ran it about...
I know this has to be easy but I'm trying to reverse my throttle servo.
I follow the instructions for the TQ 2.4 which is holding down the set button but instead of it flashing green, it...
Thank you so much!
Looking at the pictures, I clearly have the 3.3 body.
Thanks for that. 2 seconds for you to determine what model I have, 2 hours for me to figure out how to upload a photo.
I'm embarrassed to say that I can't figure out how to do it. I've tried...
That would be awsum if you could. Thank you!
Thanks for the response. Any idea what the distance between the front and rear post would be for the standard and extended model?
Need to replace the missing body for my Revo 3.3. Not sure if it's standard or extended model.
Any way I can be certain which body to order?
Seems like every time I order a new body for one of my...
Removed my traxxas TQ radio from my slash and installed in my Tmax. Now for some reason, im getting severe chattering of the servos and the steering servo barely works. Batteries in both receiver and...
Great! Thank you so much.
I must be blind cause I'm not seeing those switches.
I'll look again. Thank you
An easy question I'm sure. I haven't worked on my trucks in awhile and I quickly forget how I did something. Just need to reverse the throttle on my TQ 2.4 ghz transmitter. Can someone let me know? ...
Ok thanks a lot!
Ok so I ordered a new body for my revo 3.3 and of course it doesn't fit. Body too long. When did the revo extended chassis come out? Now I'm stuck with this unusable body.
Are all the LRP engines pull start only?
Mmm. I checked that already. Seems to be tight.
What's a good way to confirm that it's properly tightened?
Just started up my Revo after completely rebuilding tranny and installing new 3.3 Engine.
Started it up and engine running good but wheels barely moving forward.
I'm adding throttle and engine...
Ok thanks so much. Yeah I think part of the problem is the brand new engine. I have 2 batteries and one was still in original package.
Sorry to ask but I'm not familiar with the "wand."
Ok thanks a lot.
For some reason though, I get about 5 seconds of cranking time
from my EZ start before it shuts down.
Takes quite some time before it's starts working again.
I made sure...
Just replaced my existing 2.5 engine with new 3.3 on my Tmax and it
just occurred to me whether my EZ start 2.5 will work on the 3.3.
I did noticed that the model numbers are different between an...
Thanks for the advice. Much appreciated.
If I was to install a 3.3, how would the stock drive train in my Revo handle the additional torque?