Type: Posts; User: LrdNykon
Thanks again for the plans, very easy to understand. I have the original rotomaxx and its still very cold where i am so i don't think ill be building this very soon but i cant wait till i can.
pm sent and thanks for the work
while ive never used that tank i have read some mixed reviews with the majority of them being stay away. if your looking for a bigger tank i would recommend the ofna fuel tank mod. the only downside...
when i did mine i incorporated the switch into the receiver box but i dont have a specific charging jack i just have a lead on the switch that goes to the battery that i can access from the optidrive...
i dont have and experience with the integy bulks but because they cast their parts instead of machining them from billet its up in the air on whether the ones you get are going to hold up Great...
i didnt like how it overhung the edge of the chassis so if your willing to drill 2 holes you can get it to hug the trans and not overhang the edge.
i already did all that i was just asking to see if anyone had a link to some place that had them in stock but thanks anyways
can someone post a link to a site that has this chassis in stock because i looked at all of the site on flm's list and noone has them in stock, thanks
Ok thanks Snook bummer that i cant find one looks strong
Saw this in a picture from another thread and i would like to know who its from thanks.
Thanks for the replies i just couldnt find any of the ofna shocks as assembled, and i would like to just go with the supershocks because i have heard great things about them.
I know from reading the forum that the best thing to get for a 4 shock setup would be the ue Knucklehead and supershocks, well it looks like the ue store is offline again so i tried looking for the...
Well I've taken everyone's advice and moved from stock to the OFNA violator tank and the direct pull throttle, however, when i use the stock throttle return spring its fine when I'm on the throttle,...
I dont have 27mhz im using a 75 and a 2.4 from spektrum, the only radio i have that it doesnt happen on is the stock traxxas 2.4, i wanted to know if anyone else had experienced this to know if its...
Does anyone get random interference, like i have this one place a couple houses down from me where my T-maxx with a JR XS3 FM radio loses throttle for a second and the same thing with my MERV with a...
Ive got another question, do you think its necessary to run a inline fuel filter now that i have the violator tank other than the fact that ill have longer to flip the truck back over.
Ive seen some people put the battery on the front shock tower after they did the violator tank mod and i wanted to ask, has anyone had any problems with damage to their battery after they put it on...
cool thanks for the tip
im not going to use those if i dont have to im planning on making my own out of 1/4" alu rod that i already have
one more thing how long do i need to make the standoffs im planning on making my own
ok thanks for the help
When using the battery box hole is it as close to the transmission as it can get and have you had any problems with tank damage with the overhang, thanks for the help
hi im looking to do the violator tank mod and i wanted to know how far it hangs over the edge of the chassis, thanks.
i have the gpm's with the traxxas ti-nitride shafts and i havent had any problems with them
if you plug in the batteries and then let it sit there without running it then no it shouldnt get hot if it is then there is a problem and you should send it in to traxxas to get it replaced