Type: Posts; User: ecopsorn
didn't help me though ^^ I think it also could be because the set screw was so small, but whatever, tomorrow I'm expecting the new delivery together with some sweet road rage tires on Axial 8 Spokes...
you are so lucky, I stripped 3 spurs already ^^
but for me the problem was a the pinion that got loose. The hobby shop guy told me it's because I have an aluminum pinion (castle pinion) which gets...
best use imo ;)
SPC Li-Po Power, Lithium Polymer (LiPo) Battery Pack; 5000mAh, 25C, 3S, 11.1V
cheapest u can find for the price and what you want I guess.
Except it is not supposed to fit.
2h didn't cut it for me either. Give it a good 24 hours and you should be good to go.
Axial's are awesome ;)
Did you let the loctite dry or did you put it on and immediately went bashing?
I did this mod on the stock wing as well. There are two problems with the stock wing
1.) The material is much "softer" than the proline wing. Because of that, the wing bends too much and...
woooooooow, holy cow I've never seen such setup sheets until you mentioned it. That's a great piece of information, tons of different sheets available! The Slayden setup with 3° negative in the rear...
ay, gonna give it a shot ;)
Instruction manual, page 23 doesn't state anything concerning the rear vs. front angles. Several online vids and guides I checked also don't go in the detail of rear vs. front angles.
OMG, now don't laugh!
An eagle eye would catch that there are 3 holes on each lower A-arm and that smart people would choose the same hole on...
:confused: hehe ok, I'll check on it again when I get up, brainz not functioning anymore, 2 a.m. here ^^ thanks for your help
well yes, that's what it says on the product description on their website
Am I allowed to post a link? If not please a mod delete it:...
haha, omg how could I write "spear" :lol:
hmm it's too late at my place now to try to fix it, will do that tomorrow morning.
The toe-in and toe-out is not what troubles me, it's the direction of the tire... hard to explain I show it in the...
Thanks for the hint 87 GN, saw your post too late though and I'm gonna check on them the next time.
However, I'm kinda done now but I have the following problem:...
I wanted to get the RPM arms anyway, so yeah no big deal that the bulkhead broke. It's true, it's just a learning process.
Hope to have it finished soon ^^
ou well.... I figured out that it actually is the rear bulkhead and it's completely broken. But it so happens that I have a spear, yeeeeeeeeeeeeeeeeees!!!!!
Now I just need to figure out how to get...
I flew into a wall :$#!!: ! After trying to disassemble the whole rear of the truck to install the rpm rear kit, I found another damage:
so you guys got me some work over x-mas break, let's try ^^
Looks good but I don't have the equipment to do this. Anyways it only happened to me once so far that the pinion got loose, I'll see if it happens again before doing a mod.
As requested, here are some pictures of the mod I did. It's not my mod, I've got the idea from these forums:
Here are the...
hey there, hmm ok didn't think about that. I've searched for the double mount mod here but couldn't find anything. Could you link a guide/ information for the mod?
/sign also have some condoms haha, the ones I bought are some no-name pieces but for a couple of bucks well worth to get
whatever you do, don't by castle pinions, the set screws on them are way too tiny and therefore tend to slip off the shaft, destroying the spur!
I will never buy castle pinions again but would also...