Type: Posts; User: r47292
the slayer and the slayer pro have the same bumper (tra5836)
hope this helps
slayer 3.3 pro conversion
I have even used a larger eclip and bent it around so it will not fall off, not the best looking, be effective, they are the only ones not to fall off again...
The FLM CVD's wil...
In addition to the sway bars, I would use the Slayden set up on the website. I use firm springs with very little pre-load and will up my shock oil from 40wt to 50wt as temps cool. Changing the...
You will need the turn buckles also (72mm). It is also the part I had the hardets time finding.
Hope this helps,
Slayer Pro 4x4 3.3 (conversion)
Ditto on what Rob says, I have the top brace and am considering the botttom brace also. RPM is good stuff, the front Aarms will reduce some of the from end slop, and the bumper rocks!
I used the...
nice, simple quick and to the point.
I appreciate you help,
Seems to me like replacing all the bushings with bearings in combination with replacing the drag link would do the most to reduce slop. I will order the bearings and drag link and let you know, I...
Do you think the center diff and rear break makes that much of a difference?
I started with a old style Slayer and have upgraded it to the Pro. I do not have a center diff/rear brake (considering it), but have added the sway bar (of course) and variable dampening pistons. To...
Put a new 2056 in and there she goes again...
Thanks for the help!
Slayer 3.3 (Pro conversion)
OK, so here is my problem. When I start my slayer, the throttle goes wide open and I have to cut the engine off. Before I start the truck, I have full control of the throttle and brakes. I have...
I have a jato 2.5 with moabs and its set up for off road bashing, and it works great. I had to gear it down to handle the larger tires, and for $110 you can upgrade to a 3.3 which will...
I use 40wt in the front and 45 in the rear, I put a set of blue springs in the rear and the original rear springs (red?) in the front. I am running moabs all around and jump it well over...
here is the slayden tuning guide:
here is the slayden set-up sheet:...