Type: Posts; User: koolyce
There are "pinch" under the body where you need to drill your hole. Easy to follow and fits perfect.
ok, I will take a look. Thanks
I get 2 sets of rear
I ordered the Pro-line Dirt Hawg 2.2 with HPI rims 2140 and when I try to fit the tire on the rim, it seems that the rim is too wide for the tire.
Did I do something wrong? Is this...
I will see later one and maybe order some SPC
I can't write the company, but they are from china. Both battery did this. I have a third one and I will with this one.
I will try few runs to see how they goes, but I decided today to stop using...
Today, I tried my lipos for the first time. Fully charged at 4.2v per cell, the ESC was set to low voltage, so I go outside and have some fun.
After my merv stops, I remove the batteries...
Ok, I tried and everything works fine.
I tried my Venom Pro Charger with my new Lipo and for one, it work perfect. Now I would like to try my paraboard to charge my 2x 2S 2200mah.
I set my settings to 2S, 4400mah and stop...
I do also and no problem. You have to use commercial velcro. Also, I used crazy glue to glue my velcro on my body. Snow and wet condition and so far (~1month), no problem.
I think there is missing RPM arms :)
Really nice and clean
Just call Traxxas support, they will change it under warranty.
I don't use the metal washer before the nuts can go enough deep and I have no problem running it... but I'm not with a big motor like yours :)
Is your front wheels (tires) on the wrong side?
This means that the suspension reach the bottom (end). Based on what I can see, it seems that your suspension is already fully compressed and will bottom out if you jump.
I will wait for my new motor and ESC and I will use 3S in parrallele :o)
You can get 2S 2200mah for 8$ ... do you see where i am going with this :thumbup:
I'm using the stock ESC and motor and I would like to use 3S in parallele, can I? I will change the pinion for a bigger one and use my thermometer to verify the temp, so I should be ok, but is...
I can just imagine a hit in the axle and all the damage that will do... outch. Be safe.
Sorry to hear about this, but things like that happens. At least, stock rear bulkhead and chassis are not so expensive.
You should buy HPI2140 rims instead if you want something wider.
Be careful with your HR rocker, they bend so easily... a hit in a wheel and it will bend. I had mine for only 2 weeks and had to change for GPM. I'm really not impressed by HR product... they look...
Even if you ride with 30k oil, your actual diff are probably empty... I did mine with 30k front and rear (I will see if I will go for 50k in the front) and both of my diff was mostly empty...
Ok. So if the sound is normal, I'm fine with it... I'm just wondering if this was normal or no.
In my case, the noise remains mostly all the time. So I don't really know if this is normal or no. Everything is plugged correctly.