Search:

Type: Posts; User: NFS

Page 1 of 20 1 2 3 4

Search: Search took 0.08 seconds.

  1. you will be lucky if he still has it after three...

    you will be lucky if he still has it after three years.
  2. Replies
    5
    Views
    208

    all that aluminum it is just creating more...

    all that aluminum it is just creating more trouble than benefit, you might want to check the pivot balls, adjust the camber, and recenter the servo.
  3. Replies
    1
    Views
    134

    I did a conversion while ago, first you need to...

    I did a conversion while ago, first you need to lock the tranny on a single speed to achieve more speed out of it. Second you need a motor plate for the brushless motor, you can find one on ebay....
  4. Replies
    8
    Views
    399

    I had Hitec 7954 or savox 2270 installed and ran...

    I had Hitec 7954 or savox 2270 installed and ran without a bec, you only need one.


    Sent from my iPad using Tapatalk
  5. Replies
    5
    Views
    229

    Have you read the manual? Sensors can't just be...

    Have you read the manual? Sensors can't just be plugged on any slot they work at different voltage.


    Sent from my iPad using Tapatalk
  6. Replies
    5
    Views
    248

    I think they work about 15mph or above, not sure...

    I think they work about 15mph or above, not sure if they will pick up something small as an RC, better get a GPS or a gun radar.
  7. Replies
    16
    Views
    408

    Vxl 3s 3500kv in my 1/10 summit?

    You need to get the appropriate motor and esc for the seize/weight of the truck. That motor is too small for the size of the summit/revo it won't work and it won't last 10 minutes. One motor doesn't...
  8. Replies
    2
    Views
    137

    Is it new? Mamba monster 2? Newer tqi with...

    Is it new? Mamba monster 2? Newer tqi with Bluetooth and tsm?


    Sent from my iPad using Tapatalk
  9. Replies
    23
    Views
    516

    IMO MIP's are a bit heavy, cost more, and parts...

    IMO MIP's are a bit heavy, cost more, and parts are more expensive, like you said can be hard on diffs. Summit's are good option, look on ebay you can buy them on set of two needing two sets of long...
  10. I had a set of RCM diffs, I've heard they had...

    I had a set of RCM diffs, I've heard they had some issues with bearings or diff pinion not sure, there were like two versions of those I guess they kept failing not sure. Anyways they fit like a...
  11. Replies
    1
    Views
    222

    ask for the receipt.

    ask for the receipt.
  12. Replies
    6
    Views
    199

    To access those features you need the castle...

    To access those features you need the castle field card or the usb link along with the castle software to adjust the settings on the ESC.
  13. Replies
    9
    Views
    389

    I wouldn't pay more than 400 Sent from my...

    I wouldn't pay more than 400


    Sent from my iPad using Tapatalk
  14. Thread: Servo trouble

    by NFS
    Replies
    5
    Views
    184

    First you need to make sure the steering knob on...

    First you need to make sure the steering knob on your radio is at zero or neutral then unhook the servo arm and turn on the esc make sure the wheels are straight as possible and now reattach the...
  15. i was talking about the traxxas chassis brace HPP...

    i was talking about the traxxas chassis brace HPP motor brace/support been out there for a while.
  16. Thread: 1717 Swap on 4s?

    by NFS
    Replies
    4
    Views
    255

    search on ebay there is a guy that makes a mount...

    search on ebay there is a guy that makes a mount for it. also for the emaxx.
  17. traxxas has their own version too and it is a lot...

    traxxas has their own version too and it is a lot cheaper.
  18. Thread: Servo trouble

    by NFS
    Replies
    5
    Views
    184

    something must be wrong with the BEC...

    something must be wrong with the BEC wiring/voltage. What servo was exactly I've had hitec and savox without bec or capacitor never had any issues.
  19. Thread: Steering question

    by NFS
    Replies
    4
    Views
    182

    one strong servo works better than two weak...

    one strong servo works better than two weak servos, both stock servos combined have 250oz of torque a popular option like hitec 7955 puts out 333 oz of torque plus have titanium gears instead of...
  20. Thread: 2 or 4 pole?

    by NFS
    Replies
    3
    Views
    195

    it should be the 4 pole that's what comes stock....

    it should be the 4 pole that's what comes stock. The magnets might be weak probably because of overheating. I remember having a similar issue, me and my buddy both have same truck geared the same...
  21. Replies
    11
    Views
    326

    sensored Esc, and motor. brushed motors...

    sensored Esc, and motor.



    brushed motors run smooth but they are not sensored, you need a sensored motor and esc connected together with a sensor cable.
  22. Replies
    2
    Views
    140

    You can only adjust the settings on the ESC via...

    You can only adjust the settings on the ESC via castle link software either using the usb field card or usb adapter and you pc/laptop. Dusty motors or any other cover is good if you run on water or...
  23. Replies
    1
    Views
    161

    seeking advice after you bought the tires ?? No...

    seeking advice after you bought the tires ?? No idea on those duratrax wheels. I always ran proline tires and they are all good, trenchers, mashers, badlands are the best for the erevo low profile...
  24. Replies
    5
    Views
    215

    buy the set and keep a spare.

    buy the set and keep a spare.
  25. call traxxas !!!

    call traxxas !!!
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4