Type: Posts; User: tbird2000
if you ARE worried about performance you really cant go wrong with the BFG stockers, but i recommend different rims, as mine cracked very easily and now i CANT USE THEM GAWDANGIT!
take a dremel and cut the motors in half, and scrap any copper and gold from the motors and connectors. get around 1-2 buck per titan
last question. do you have to use lipos or can you use a 4200mah 7 cell 8.4v nimh?
i like my trenchers for after it rains, loose dirt, but not on pavement
if the motor can take this, try gearing up. this may damage your motor, so watch your temps
yeah it doesnt need to be waterproof so i guess its decided, ill get a sidewinder. does it give a large performance difference compared to the velineon?
See post #5, above.
basically try to charge it at its rating (3.7v per cell) or overtime it will cause damage and possibly burn. however, id rather have a lipo fire in my slash than a nimh explosion imo. just treat it...
looks good, not going to say anything about the chevy, and im sorry i have to do this, but its the only way to avoid flaming
ignore my last one plz
great way to avoid flaming mate this is the idea i was talking about
+1 very much neater and "classier", if a slash can be classy. it also adds some variety to it, and some performance additions
you may find better answers on the rustler forum, seeing as this one is for the 2wd slash
im no expert, but from what i understand, mods diminish it, but i would buy one like that for 700 rtr, 350 without motor & receiver
another titan motor melt!!!!!! what do i do? I dont want to spend more than $150, and im expecting a crawler (reason for budget), so what should i get? just leave traxxas? i dont want to! Is there a...
mounting is generally easy just look up how to on youtube
actually, an SORRCA vehicle is 2 piece axle, rail frame, and if you dont like the motor get another. my scx10 is going to have a tekin when i get the cash
the bane of my existence!
put a spur cover on that! you've got the mounts! also check to see if the gears are metal, because i forgot if they are plastic or not. if plastic, put in a metal idler (the center) and drive (the...
just cover it with saran wrap
haha well then how do you clean it? just lube the outside (twss) and spray it with motor cleaner?
also buy some electric motor cleaner, thread lock, ca glue (in case your tires unglue), and a bunch of spare screws. make sure your screws are tight and spray your motor until the liquid comes out...
rpm has a great hidden wheelie bar that wont break as easily but only mounts on an rpm bumper
how do you get the bushings out? im going to replace my titans (i have 3 that were internally destroyed friblin water) with a mamba max and i want to scrap the titans copper and aluminum or tin or...
use some ions with a mamba max at a roller blading rink, that should work fine
some like maxamps, but they need a different connector, so i dont use them, plus they're EXPENSIVE. but thats supposed to be expected i suppose