Type: Posts; User: sideshow
I just used the losi drive shafts
20 or 30 bucks for a set of 4 is cheap
plus all u need to do is find correct bearings
and sort something with the hex hubs
much easier than mucking round with...
cool i think i havnt used the dogbone they sent me as i redrilled the centre trans shaft so the drive cup sits further back afew mm, never had probs since , its probabably in my big box of spares, i...
the original kd dogbones had a front shaft that was 2 or 3 mm to long
they kindling sent me a replacement of a shorter type but maybe they cant get them anymore
I did buy a dogbone of ebay from...
hopefully you got one of the transmitters that will work for longer than afew weeks
u need temp sensor that wraps round motor
rpm is small magnet that sits in a new style slipper plate and then...
yes I got that kit and never broken it
just redrill front output shaft on tranny if the front dogbone is abit tight
its cheap and ask for 8mm cups for it
I run losi diffs and kershaws dogbone kit and use origin al traxxas long grub screws and never have any issues
I don't even locktight the grub screws and they never fall out
ive never had problems with grub screws coming out
I use traxxas original grub screws that pass all the way thru
when I was using the short grub screws sometimes they would come out so I would try...
mate u need to bring out the big stick welder and weld that grubber to the cup hehehe
I think everyone is going out and buying losi rc cars
I guess traxxas is not listening to the people on these forums but luckily there is plenthy of noobs buying the erevo and running 4s
and not having issues to worry about breaking diffs etc etc
im running a kershaws dogbone kit with lst diffs and I think I got rc monster 8mm cups a long time ago
and I got a spare front kershaws dogbone
y are some shops stopping to make stuff for the...
if u r not going to send it back to traxxas just pull it apart and there is 2 or 3 thin flat 10 or so pin connectors
just pull as much of the unit apart and replug connectors back in...
Hey Mitch I'm contemplating tutting a rubber stopper inside my erevo shock to try stop the suspension drooping too much when car is in the air as this is what pops the losi axles out of the diff cups...
traxxas must be paying u to post this message whenever someone has a tqi problem
why not tell traxxas to send me a new tqi to replace my broken one and also put a return post bag in the package too...
for some of us its not that easy to send it to traxxas as to pay for postage is nearly same price as buying another transmitter from ebay or somewhere
its so silly that here in Australia there is a...
Is funny how whenever we talk about the diff problems where traxxas is the blame no one from the company has any input or
Gives us any info on what's going on
I don't know how they keep selling...
u can also turn your punch down
I think mine was either 40% or 60%
just makes the initial burst of power down abit so your not instantly smashing the axles or diffs
I had std diffs last me for a...
they are easy to maintain
just remember the faster it goes the bigger the damage when it stops in a hurry due to a brickwall or a car or a hill hehehe
my friend has a 300 dollar rc car from ebay...
There is a lot of small fiddly things u will run into
I did this mod over a year ago
U need to remove the centre shaft of the losi diff
I'm running kershaw design centre dogbone kit
U need to...
I have a front and rear chassis brace mod which has helped
But I broke the mounting for front rods so front end wasnt braced and maybe that's y the
I'm contemplating buying an...
I removed mine got sick of the never ending peoblems
Friend and I went bashing last weekend
I have losi shas and has runs MIPS
He lost two grub screws
And my losi axles popped out after times
There is no cure for anything on the driveline on...
Just saw some pics of the summit shafts
I see they have ball type join on the ends with no lugs to elongate which
Might be the way to go
Do I just get 4 of the long ones
Do summit shafts have same plastic uni where it attaches to diff
Do they still elongate like std erevo shafts
I think they pop out over jumps on full droop
Of when I have side impact when...
went out today with a friend at local bmx track
had some huge jumps
but one attempt i tried to jump from one jump over the other like a motocross dirt bike
but i hit the second jump head on...
too many issues with the tqi stuff
i got upset (putting it bluntly)
my tqi tx worked but rx didnt properly
replaced rx allworked good then tqi tx failed
so pullled it apart as it was cheaper...