Type: Posts; User: boxie01
Bandit VXL Bash Session.
Pro-Line Dirt Hawg's Ballon Test.
Traxxas Anaconda's Ballon Test....
If I had a small pinch in my servo wire, how would it affect my bandit?
+1 to that!
I use 19/86 & 23/86 with my Sand Paws & Dirt Hawgs. I proberbly use 23/86 more which is good for the beach with my Sand Paws & hard dirt/road with my Dirt Hawgs. Temps stay in check around 160-170.
+1 pics please!
The washer locks your diff so that it acts as a LSD(limited slip diff).
Theres a thread about it on here, search 'loc washer mod'. I would give you a link but im typing from my phone atm.
Loc/Split washer diff mod?
REDEMPTION your post was clear as day. But as CHIMBO has already stated I was typing my reply at the same time, but you were faster too respond & because Im typing from my Nokia N95 8GB I didn't want...
The expansion kit only raises the ESC mounting plate. For your LiPos too fit you will need dremel the rear wall on the chassis.
+1 to the P-L Sand Paws!
+1 to baking! Alot better than boiling them imo. I done it for the first time a couple of days ago it worked a treat.
Preheated the oven to 175 & then left them to bake for 5-7 minutes & all was...
Ok thanks I think im gonna go with you on this one & completly seal the tyre without foams & tape. I am cleaning the rims right now & planning on mounting the tyres tonight so I will keep all of this...
I dont think I will be cutting holes in the tyres, just doesn't feel right.
Leaving the holes open on the rims, wont they get chocked full of sand with the foam inside, & since the sand doesn't...
When you say 19/86 is that for use on just sand or would that be safe for onroad/dirt with my Dirt Hawgs? & when you say you didn't bother with the holes is that the air holes on the rims or is that...
So I just recieved my new Sand Paw's which look Insane! :wacko:
I will be using them on my bandits with my 11.1v 3s 8000mah MA LiPo's.
My questions are: I would like to know how I should be...
Thanks, will do.
The cops offered... Why not take!
Your lucky, that would of been like christmas!
LOL I done the same thing the very first time I ran my brand new Bandit, except the fire hydrent was a light pole!
How did that work out?
Im so gonna do this washer mod next time I pull the tranny apart! Can you guy's tell me if I have to do anything to the split washer? Or just slap her in there!
I used two flathead screwdrivers under the gear. One on the top side of the tranny & one on the bottom side, using the tranny case to push the gear up off the shaft.
Works like a charm!
I fully agree! It must be a pilbara thing! LOL
It cant be a 'struggle' to get a Rusty/Bandit or any 2wd to backflip. Im new at this hobby & While down at the beach hitting my jumps I've been able to pull off several backflips while not even...
wow is that a battery! Could hardly tell.
What type of washer & what size please?
I like! Look's top's.