Type: Posts; User: discosurf
thanks for the replys, I removed the two servo wire in the receiver box, and turned it on you can run the car but you just can't steer, they turn slightly but they tend to shake more side to side...
you can use 1 metal servo but they are not waterproof, but you can use 1 metal servo instead of 2 2075 waterproof servos
hi guys, I have problems with my erbe, replaced 1 servo after servo was very noisy when turning on
but cannot turn the wheels at all, took it to my local hobbie shop they connected a different servo...
Hi guys, put on my proline phaltlines with hpi blast rims after mounting the body, worked out it is easier putting your 4 holes in before you paint.:wacko:
here are some pics,hope you like.
finally got to try out those proline big joe's out, cause its been pelting with rain for the last week, man there is no way you can keep the front end down
as soon as you hit the trigger up she...
here it is on my erevo.
ok here's my ford F650
I have a ford f650 under way, pics next week.
Try a` set of these proline big joe 3.8:D :p :rolleyes: :D
do the geode rims and canyon tyres fit erevo? there meant for summit but are 17mm hex, and should be okay.
thanks for the replys, once I take the toelinks off I should be done
one side was broken off where one of the screws goes on the top section
could someone tell me the easiest way to change your front bulkheads
does eveything need to come off?
do you connect both batterys to the esc, when using the castle link?
great write up brett, we are all endeavoured with your help!!!!!!!!!!!!!!!
not sure how fast, don,t use speed monitors, but its fast enough for me:lol:
do bashing at local tracks and lots of room at the local girls high school
on the road i,m using HPI phaltlines on...
on 4s i,m running 18/54
never had any temp problems, leave that to the 6s guys.
do they come with the pins? i've seen some sets that come with the pins.
managed to pick up a 17mm tube spanner this fits perfect!
cheers thanks, had trouble looking for that info
guys whats the best way to remove 17mm hex to put on 14mm?
how much oil should you put in? haven,t done mine yet and will be handy to know.
will have to check on that hpi wheel tool
found it a bit hard finding a 17mm socket to fit the phaltlines on the erbe
so I just used long nose pliers to get them on
hyperion retails $299.00
have a look at the icharger