Type: Posts; User: sdrubow
Keep all images to a size of 640...
This is my first paint body by myself, so little problems but nothing serius. And isnīt body roles yeat.
Can I use a transmiter and a receiver of a plane, in a car?
The transmiter is 4 channels.
Will this work fine?
this is 3300kv the velineon is 3500kv, velineon is faster than this
I openned the ESC and let it on sun to dry. now itīs Ok, all correct.
it was out of warranty
"I was geared 15/90" this it not so long to give a ride on grass? i think this was the problem.
using a motor with more power like Vellineon, the shafts tend not to endure, and those points where they hold the metal ball flare and are leaking over time. using these rings they are keeping these...
I think that using the arms of the RPM has no problem because he does not have those high on the side as the original arm.
I do not know if the 2.5 degrees would influence more in the position, if...
Somebody know whats happen
I just plug the battery and the ESC turns on. The lights go green or red, sometime a noise like turnning off the cut off and the led go red, so blink green.
Yes very narrow clearence between the shafts and the arms, but they donīt rub. Maybe they touch sometime, but nothing serius. Until now, they donīt have any mark.
And I didnīt note nothing...
I run now and no more problems with this part. I use velineon with 3S lipo.
No more scapes at now, so I think this was a good idea.:rolleyes:
I had some problems like this.
And other with the shafts. I used this to solve some problems.
I bought a piece of Axial that aims to halt the drive shaft to prevent escape.
I put in the slash and this is the result.