Type: Posts; User: GULLY
I think they're saying that particular motors max temp is 200 but shouldn't go over 180
all motors are going to get hot, try lowering the pinion gear :)
I never said I had a BB but I will eventually and I'll definitely be sharing it here first :D
lol thanks man
I was really considering buying a brushed mini like the merv or gravedigger and swapping the vxl out for the bb gear cover and mount.. but those AM radios really put me off on the whole idea...
oh I know, thanks a lot guys.. thanks for looking out for my lungs jimmie :)
I'm just gunna open the door and window in the basement and wear that mask I took from the hospital , I should be fine...
yeah the speed has a lot to do with the rating I see..
yeah I seen that how they kinda just threw out levels there like "whatever, 2 here, 1 there, who cares" lol
lol yeah that was funny stuff SA :lol:
I finally got around to going to the hospital and getting a soldering iron :D woot
found a sweet deal for $16 I got a 60 watt with a dial on it so 5-60...
mine aren't stripped out, I just mean the little screws that hold the pivot balls in, so when I take them out and put them back in, I use needle nose plyers and it takes longer.. so I'm saying I just...
he made it to flip the thing over, if it goes belly up
they stopped selling that gear cover though it has an r at the end of the number now and comes with a hole in it for the rpm sensor on the new tqi remotes :eek: so you might have to...
hahah me too :)
I'll test it out tomorrow when there's light! lol these cameras suck at night
TRX7360 550 motor mount
TRX7379 gear cover 550 motor
TRX7380 550 motor plate
TRX7024X receiver box*
Most of the newer vehicles already have the rx box
lol just copied and pasted that but...
a motor plate, a gear cover, and yeah a different ESC.. there's a thread on here that gives the part numbers for everything needed..
lol ninja dance :) I like it.. seriously I'm not trying to be a doosh :D
you guys are bad for merv owners.. your words, not mine
sorry if I misunderstood
I see what you meant now lol,...
I found these, they have a very high offset
those are called 2.2" rock ripper wheels and they'll give you a wider...
12mm hex is just the hexagon on the inside part of the wheel that fits over the 12 mm hex wheel nuts..
I think if you google high offset wheels for merv, you might find what you're looking for..
I forgot to check this out earlier, that's funny :D
next time that happens you can just pop them back in on the spot if you want..
it beats unscrewing them, in my case any ways...
A hitec hs 85 mg :)
I couldn't get any decent shots because the camera on this phone blows and they turn the parking lot lights off around 12:30 I guess..
so I was bashing in the dark but I had...
lol you know me :p shimon
well I got it spinning :D took longer than expected, this is what came out after I almost broke it trying to fix it
I think it was constipated :eek:
alright I want to bash now, I took the bearing only one was seized so I took that and cleaned it a little and WD-40 put it back on and it still doesn't spin..
do I have to completely take the...
here's a 2 second vid leterally lol
I just disconected the axle and the stiffness is coming from the bearing but I think I can save them still, they must have seized because I didn't bother...
are you kidding me!? it better not have.. I'll go check :mad:
thanks for the quick response man, I think you might be right
I'll check on that too krall, it's really stiff so it's connected but...
My back left wheel won't turn unless I turn it myself.. it isn't loose, it's really stiff and all the other wheels are fine :$#!!:
I'm trying to take my dog out and go for a little night bash here...
yeah my not so local hobby shop is full of crap too, they don't know what they're talking about half the time.. that's why it's best to check here first :lol:
yeah I know that's why I asked you to take a look at it, lol the width is all screwy hahahah looks like it's just a horrible choice hahah
thanks a lot man, for taking the time to do that
lol I like the lego dude hahah :lol:
thanks for taking the time man, appreciate it
so I just need to find out what big bores will look like on there so I can have a better idea of how it will...