Type: Posts; User: camaroloverx4
it will just stutter a bit and move slow but not enough to move the truck
hey guys my slash 4x4 has the traxxas funny car motor in it with the momba monster sct esc.
a couple weeks ago i was running it outside and ended up rolling into a water filled ditch and after that...
oh ok cool so just tape it back down to the front sounds like fun stuff
anyone have a good gear set up for a 2400 kv motor i have a 14t pinion and stock spur that id 54 i think?
i got bought the bracket cause i like the way its got the spot for the switch and its cheap. does the receiver move easy or is it kind of a pain
oh that sounds like a great idea
some pictures would be great
alright i have been bouncing between two projects. 1. castle creations 2400kv motor from the drag car with the MMsc esc for it. 1. a reavo 3.3 E conversion.
on my slash with the 2400kv motor i...
ok i went ahead and laid on the cash for the MMP
thanks to all of you
so can i run the et-3s out of the drag car as well? or that only runs on 3s lipo and the mm2 can run on 4s?
now with the 2400 motor do i need to get a motor mount?
i baked mine just on a low like 250 and would pull them about and used a spoon to break them off
i have a revo 3.3 sitting around with i bad engine. i also have a electric motor from a slash 4x4 around. i have seen a thread on converting tot he electric revo using the tekno conversion kit but i...
Awesome I'll be ordering one!
Looking to put the 2400 castle creations motor in my slash. I see it works with the stock esc.
My question is
Does it bolt right up?
Is it water proof?
hey so i stripped my spur gear and ordered a set of four off of ebay for slash 4x4 how ever as i set with my slash in oarts i find out its a diffrent one its part number 3956R its listed as an...
why get a slash when you can just get a buggy?
i just got an SPC 3s and it is awesome to use
awesome reply thanks guys
hey guys i plugged up my new spc battery 6500mah 65c 3s and after about 30 seconds it grinded off the spur gear. i guess the gear mesh came loose. as far as getting another one do you guys recommend...
the large gear had two like thin tracks grooved around it. so it still works great for now but i just snapped the rear drive shaft
fixed thank you very much
it was the gears
hey guys i was using the new 3s lipo i got since i fried my other one and i grabbed the brakes on full and my slash did a front flip and tumbled a few times in the yard.
after that happened i...
spc? whats that
yeah i skipped the reading but since it cost me money ill be reading it now
i did read the charger tho
Wow that really stinks
So if your battery gets too low then it's done?
Yes it was still connected to the truck