Type: Posts; User: parusa3
here's one of mine: https://lh5.googleusercontent.com/_XgGPq7TA9mw/TWhKQ9wdNpI/AAAAAAAABP8/xvDDBz3mjW4/s400/2011-02-10_12-42-05_706.jpg
I'm running these ofna onroads on both my 4x and 2wd. they grip well and lasted so far. have been running them for at least a year now.
Thank you.. ill start to tighten til I get the slip I want.
thanks for the part numbers. i just installed this on my slash4wd and the one full rotation like stock seems to be too loose. What are you all running as far as how tight/loose?
Here's mine: http://lh5.ggpht.com/_XgGPq7TA9mw/TMNCs3SKO5I/AAAAAAAAA3o/8xwjN_RO0Zc/s400/IMG_20101017_141030.jpg
just bashing around on a wet basketball court.
first time running the talons on the 2wd VXL.
Watch it 720p if you can.
front or rear talons?
What 32p gearing are you running with these wheel / tire combo?
I'm running 13/54 with 2s on my vxl setup. Haven't tried it yet with the new pede wheel /tire combo. Just want to make sure that I'm...
thanks. I'm gonna go with the fronts for wider stance. gonna use the bajr body.
looking into getting a set of stampede talons for my 2wd. which ones fit the best? fronts or rears?
anyone have the TRA6840 mounted yet?
anyone try this on a slash yet?
says for a 12.3" wheelbase. what's the wheelbase of the 4x4 slash?
or this ?...
thank you. i'm headed to the LHS tomorrow to get me a 54 and 56 spur. I most run on dirt flat fields. I liked the speed of my 20/86 48p. what's a good pinion to use for a lot of WOT that would go...
Just trying to figure out which pinion i should get. I have VXL and running 7cell nimhs. Just bashing on dirt, street and some grass.
I got an 11, but the motor will not move towards the spur...
had to slow it down a lot. shaking too much. :D
a little video of top mounted cheapo keychain camera
I checked and made sure the body wasn't rubbing. When i turn hard and loose traction on one side, it makes this grinding noise. could it be the slipper? how do i check? any other thoughts?
Here's my first test with a keychain camera. Still working out the right angle.
how or what mount and camera did you use? any pics of it mounted?
thank you..i guess i'll be using my Tower discounts for this. just making sure that i wouldn't have to mod or have a hard time installing the Rx in the case.
how's the fit for the receiver in the slash receiver case?
anyone using the MX-3 on the 4x4? how do you like it? do the RX-371 Receiver that comes with the MX-3 fit inside the receiver case on the 4x4 fit with no mods?
any other radios for under 150 that...
I'm running 19/86 and It's been fine for bashing.
no issues here.
i'll have to look at that too. thank you