Type: Posts; User: alexisg
hey guys i wanted to waterproof a servo i got for my revo 3.3 and i was wondering if beeswax was appropriate and if yes how should i use it to waterproof my servo.
thanks in advance
try and reset your needles on the carb also start the car in a warm environment like a garage but keep it open to let the fumes out
hey guys i was wondering if it was possible to waterproof my servos on my jato 3.3 using beeswax, if it is possible could you guys please tell me how?
Thanks a lot
exactly the engine is the only difference you'll be fine
have you tried to close your idle speed screw a little?
the jato 3.3 and 2.5 are basically the same except for the engine and body paint, the gtr 2.5 should achieve a speed of around 55 mph while with a .3 engine it should go about 65 mph
like the others said tighten your slipper clutch, i would tighten it completely then loosen it a 1/4 turn but that is only a good starting point (only do 1/8th turn clockwise or anti clockwise...
ok i managed to set the camber but not the toe so my question to you guys would be, what's your toe? so that i can set my wheels straight
i have tried a different location for the turnbuckles and this is what the wheels look like now
hey guys i have a little question, my jato keeps turning right and i cannot see why, i have tried steering trim but it didn't work out, this happened when i installed the aluminum turnbuckles (part...
great news, now thanks to you guys my car is running well, i have placed it back to factory settings and it's not overheating!!
ok last question before i leave you alone, in your video i did not quite understand what to do with the caliper.
thanks "assassin" i'll give it a try, that is once i get my turnbuckles from the mail, i crashed my car into my dads leg,the breaks are not very good unfortuatly.
well, i am only half a turn clockwise from factory setting, it's strange that she is stalling, i even checked my head for leaks and found none, i think it could be me fuel line, i installed a fuel...
She doesn't cut out immediately but she doesn't jerk forward either
hey thanks for the help, my jato idles quite well and the engine temperature drops slowly at idle as well and at high speed there is a nice trail of smoke, when my glow plug burnt it was clear and it...
Hey guys, i need some help with my jato, i am currently tuning it and i have only turned the HSN about 1/2 a turn and did not touch the LSN, anyway when i apply full throttle my jato stalls also the...