Search:

Type: Posts; User: Spencer911

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds; generated 10 minute(s) ago.

  1. Thanks guys, I tried out the HD 1844 saver, its...

    Thanks guys, I tried out the HD 1844 saver, its too soft, well this hobby is pretty wasteful, no idea what to do with it now :D but I bought a $4.25 alloy servo horn. I try not to go off topic off...
  2. I mean I just thought the 1844 servo saver looked...

    I mean I just thought the 1844 servo saver looked good, maybe I could swap in a stiffer spring, its just about protecting the servo from damage... crawling is harder on servos than open round...
  3. Questions about traxxas 1844 HD servo saver

    Hi all, I bought a traxxas 1844 servo saver for a project, and I was wondering how stiff the spring is, or like if there is a spring in there? If so is it like as stiff as the one on my traxxas...
  4. Replies
    6
    Views
    342

    Yea, my idea was, I bought the summit a decent...

    Yea, my idea was, I bought the summit a decent time ago, I think about 3 years ago... I may just drop a mamba monster and run 4s and just see how it goes, although lol I would need to upgrade the...
  5. Replies
    6
    Views
    342

    MM2 v2 brushless in summit? Bad idea?

    Hi all, since I am seeking employment, I had an idea of making the summit brushless with a mm2 drop in, my summit already has a full set of RPM a arms and a savox 1230 sg servo.

    I have kinda...
  6. Just thanks for removing a general rc question, I still had a question

    I was just asking about if the 3.17mm shaft is the same as 3.175mm. because all I can find is 3.175mm, not 3.17mm idk... I used the velineon 3500 on the rig, it was too long that is why I have to...
  7. Replies
    10
    Views
    579

    The erevo is lighter than the summit, without the...

    The erevo is lighter than the summit, without the locking diffs, extra servos, bigger tires, bulky body, brushed motor, NIMH's or lipos, the erevo is just lighter. I have still been considering...
  8. Replies
    1
    Views
    107

    I would go and contact traxxas support, I didn't...

    I would go and contact traxxas support, I didn't have issues with any rc's out of the box anyway, so I mean that esc by your findings is toast, the puff the magic dragon smoke means the esc is likely...
  9. It is possible that the lipo packs could be...

    It is possible that the lipo packs could be damaged, as traxxas esc's have the low voltage detection set at about 3.2v which I think really isn't great(destroyed an SPC 5000 2s pack in my rustler...
  10. Replies
    5
    Views
    253

    also comparing the rustler vxl I had to my...

    also comparing the rustler vxl I had to my summit, I am really more into the offroad crawling and trailing scene than going fast, well I haven't got the chance to run my rustler vxl around... I like...
  11. Replies
    36
    Views
    1,427

    the evx-2 can only run 2 2s lipos in series, that...

    the evx-2 can only run 2 2s lipos in series, that is the max(that is all it can run, or 2 7-cell nimh packs), I have heard people run 5s, but I personally wouldn't do it... You will need 25t spline...
  12. Replies
    36
    Views
    1,427

    so, for crawling, you actually want the truck to...

    so, for crawling, you actually want the truck to droop, this lowers the cog. SPC 8200mah 2s packs are basically made for the summit, or the SMC 9000's are good too I have heard.

    You could get...
  13. Replies
    12
    Views
    567

    well lol I meant to states the summit uses 2 2s...

    well lol I meant to states the summit uses 2 2s lipos or 2 7-cell nimhs lol
  14. Replies
    12
    Views
    567

    If you wanna go nuts, I was thinking of getting...

    If you wanna go nuts, I was thinking of getting SPC 8200's 2s packs, or SMC 9000mah packs, I run the 5000mah 50c 2s lipo in my summit, and get a good 25mins ish, those bigger packs would push you...
  15. Replies
    6
    Views
    261

    A solution I found with my rustler vxl: take...

    A solution I found with my rustler vxl: take some 100 grit sandpaper, and rough up the pucks and the plate they rub up against a little bit, this will give the fiber pucks grooves to grip into in,...
  16. Replies
    10
    Views
    579

    lol cool idea: take a traxxas summit, make it...

    lol cool idea: take a traxxas summit, make it brushless, and make it look 100% like the erevo;) deceptive lol, I had thoughts of doing that, just buy an erevo body, get the wing and all, lol.... ...
  17. Replies
    7
    Views
    497

    WD40 if (count me if I am wrong) is a water...

    WD40 if (count me if I am wrong) is a water displacment 40, it can actually make things rust, cow rc makes stuff called moo slick or something...
  18. double post

    double post
  19. it doesn't seem to be an electrical connection...

    it doesn't seem to be an electrical connection issue its pretty annoying, what should I do? I am pretty annoyed, cuz it just doesn't always happily link up, I have never had this issue with an rc...
  20. The way it is setup is, there is a separate BEC,...

    The way it is setup is, there is a separate BEC, I plug in the BEC side and it energizes all the servos etc... Then I turn on the esc, the BEC is tied into the left esc side with a homemade adapter,...
  21. Use a single LVC alarm/checker thing, attach it...

    Use a single LVC alarm/checker thing, attach it to the lipo pack via the balance port, and stuff it in one battery tray, I found you only need to do this to one batt, as they both discharge super...
  22. summit doesn't always "link up" the first time it is powered up

    Hi all, I am curious as to why my traxxas summit doesn't always reliably link up via the radio to receiver communication, like it will do it, but sometimes it will link up the 1st time the radio is...
  23. Replies
    20
    Views
    572

    Lol guys I would wait for Traxxas to reply to...

    Lol guys I would wait for Traxxas to reply to your support, the summit is a good truck it really sounds like you guys got lemons sadly, Traxxas will help[emoji1] let us know how it goes, is there a...
  24. Now idk, I have waited since the 8th for a reply,...

    Now idk, I have waited since the 8th for a reply, still nothing... I am beginning to think of ways to make my own 1st gears out of traxxas 2075 1st gears by 1st chopping off the molded part of the...
  25. Replies
    20
    Views
    572

    I actually broke the shift servo on my summit...

    I actually broke the shift servo on my summit eventually one day it was just going crunch crunch, I felt too lazy to replace the gear set, so I just replaced it with a 9 gram hextronik servo, I have...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4