Type: Posts; User: LowTEC
photos or it never happened :p
+1 on t-bone
My first VXL motor bearing seized so I changed 2 brand new bearings, then a couple months later the front bearing turned slightly sloppy and 5 minutes later the bearing "exploded" and the tiny balls...
doesn't the width of the revo rims actually wider than the mini's a-arms?
^^ that really sux
It is like asking if a 18 wheeler has any part that can fit a civic. Not even the body clip will remotely fit to the mini, seriously. I would love to see the revo wheels fitting on a mini, that would...
i've read some ppl put 60 weights in there, that might help, OEM comes with 40 at the rear for your info
I'm surprised no one suggested using thicker shock oil ( or did I miss that). From my experience, thicker oil is much more effective to absorb and low down the impact. My E-maxx has major bottom out...
extended wheel base is just what this chassis needs for more predictable driving, it's hard to control the truck at full throttle as it is
any the fact that if any rock get caught in between, it will lathe the drive shaft in no end lol, what an idiot idea
I can confirm these ones fit all traxxas 1/10 no problem
I'm now looking for some ***** 3S that can fit in my PE, anyone can help?
1mm thickness difference will be much stronger. on the other hand, .001 from touching the ground makes absolutely no difference, the kid will be dead either way, toes barely touching the ground...
it's either a loosen pinion or the pinion gear exploded, open up and take a look
no it was nothing unusual about the set screw. I actually prefer Traxxas 32p pinion over rrp's due to the wider width that perfectly match traxxas spur. But I don't want to take my chance with the...
My 13t pinion get exploded exactly like that, it was my second time out with the truck, what's up with traxxas quality lately, I personally have never seen or heard anything like this before.
^^ that and get rid of the heavy rear springs
I can confirm it is a MAJOR FLAW. a piece of pebble trapped in between the center shaft and the cover, and shattered the clear shaft cover; also almost cutting thru the shaft and that was within the...
^ Agree, I don't see the point for the major down grade
i wouldn't even think of getting 14mm wheels as the stock stub axles are made with Tofu and can't even hold the stock light SC wheels, let alone the wheels and tires that are 3 times heavier
don't discharge them
From my understanding the red springs are softer than OEM (for less shock load on the axles); the lower arm to inner hole will effectively affect the shocks and springs to less leverage therefore...
The BIG BORE is actually shorter AND narrower than stock plastic set. and majority of traxxas fans seems ok with it
the paint job is by far the best one I've seen, just wow
with stickers, the body can be actually quite nice
Thanx for the heads up, this is not the first time I read the same problems with FLM, I will definitely stay away from these products. I feel ya bro, I will be pis*ed spending that amount on a hugely...