Type: Posts; User: Minimasta510
I have the cc 1406 4pole. And I just wanna make the esc wires shorter has anyone done this?
Can I cut the wires on the MMP esc and motor to make it shorter? The leads are so long!
I have the the integy cvd center drive and has worked great, loctite on all the grub screws and hinge pins is key. I didn't bother with other integy stuff cuz it is crap but Ive been riding hard and...
Yes I am. thanks jimbo and RC!
Yes there's foam and like you mentioned the titus' are narrower than the dishes. would it be fine to use the same foam even if the dishes are wider?
So I got the Titus BLs w/ dirt hawgs and wanted to know if I can just take the tires off and mount them straight onto 2.2 dishes? Or do I have to cut the foam or get new foam and cut?
So I'm still having tire wobbles with the Titus BL w/ dirt hawgs should I try balancing them?
Take the grub screw off carefully it sticks sometimes then slip it off the motors shaft then when u put the new one put a little removable loc tite.
You can get the castle link to adj all the settings it's easy and convenient. I don't have any problems cogging tho. Mine runs really smooth and im runnin a 20t p and 53t s. And as for the battery...
Nice job bro! Impressive esc mount! My esc is held by dbl sided tape :( just got lazy I guess. Let me know if u make more esc mounts please!
Now that's a bb kit!
Make sure you check the pins on the cup of the cvd and put a little thread lock cuz from what I've noticed they seem to be a little loose and will cut up your gpm knuckles, also check the o rings if...
2) steel hollow balls
3) rpm arms
5) push and toe links
In that order is what I did. Beceause that's the problems I had w/ stock setup in that order. I can keep going but...
Any one using these silver gpm springs from the toyz on gtr shocks? And is it ok to use them on it?
Or the traxxas 7246...
^ +1 exactly what I just did. And FYI you might need to upgrade to stiffer springs and shock oil but hook it all up first and see how the bb goes first.
Thanks guys and side null! I have the precision bearing set from thetoyz I replace the bearings in the knuckles and put them on the rockers.
I think you need a cc BEC.
Ok ima try it out. If all else fails should I replace the tierod ends with gpms? does anyone know if they fit? And also what are the 2 smallest tie rod ends are for?
What brand are you using? Because from what I heard the viscosity varies between brands.
Thanks bro. I still want to know what other peoples shock setup with a bb kit. So anyone with a bb kit please post your shock setup oil, springs, etc.
Sorry and what brand?
Do u have any suggestions for a shock setup for the bb?
What shock setup are you running dad with your bb kit? My rear has black springs and are coiled all the way down (raised) and bottoms out due to the weight. Do I need even stiffer shocks and thicker...
So I have the bb kit w/ MMP and the 5700 and I am constantly bottoming out I have the gtr shocks in it with tan springs in front and black in back. Filled with factory team 10k and 3k mix 60% 10k...
So I have the trx push and tie rods and it has a bit of slop does putting metal hollow balls help any?
Now with my BB kit!