Search:

Type: Posts; User: troglodyte

Page 1 of 2 1 2

Search: Search took 0.02 seconds.

  1. Replies
    7
    Views
    251

    I mounted my rpm/speed sensor on the gear cover. ...

    I mounted my rpm/speed sensor on the gear cover. Took about 2 hrs of trial and error to get it positioned correctly. Had to cut a hole in the cover and use a piece of plastic shim to mount it on -...
  2. I have a VXL 'pede and with my 3s lipo it's...

    I have a VXL 'pede and with my 3s lipo it's almost impossible to keep the front end down at all. A 2s lipo is more than enough for what I do with it, it will still do wheel stands at half throttle....
  3. Replies
    9
    Views
    299

    nickf, I cant compare it to the 4600 since I dont...

    nickf, I cant compare it to the 4600 since I dont have one. But compared to the MM 5700 that I run in another 'pede it is slower, but the MM seems (to me) to put out more power anyway (compared to...
  4. Replies
    9
    Views
    299

    According to the Castle Creations website you can...

    According to the Castle Creations website you can use 3s lipos with the 4600kv motor. I have run my Sidewinder with my 3500kv motor with no problems.
  5. Replies
    21
    Views
    750

    Silly Putty. Locks the diff real nice, wont leak...

    Silly Putty. Locks the diff real nice, wont leak out and is reversible.
  6. Thread: Slash Tires

    by troglodyte
    Replies
    22
    Views
    1,056

    I have 2 rear sets and 1 front set in addition to...

    I have 2 rear sets and 1 front set in addition to what is on my Slash. I'm glad I bought them when I did, I havent seen any of the original style lately, all they stock now are the new ones. Pretty...
  7. Replies
    87
    Views
    9,540

    No, I am running Velineon and Mamba sysytems -...

    No, I am running Velineon and Mamba sysytems - Ive had these systems for going on a year now. Running on average of 3 times a week. I just dont run them down to zero. I check temps often while...
  8. Replies
    87
    Views
    9,540

    I have 5 Venom NiMH packs and 4 of them are over...

    I have 5 Venom NiMH packs and 4 of them are over a year old with more cycles run than I can remember. Haven't had any issues other than 2 wires working loose (* Knock-on-wood *) which was caused by...
  9. Replies
    37
    Views
    471

    I would buy a RPM front bumper. Mine has saved...

    I would buy a RPM front bumper. Mine has saved the A-arms many times. One of the best IMO.
  10. Replies
    23
    Views
    900

    Personally, I don't think it looks right when a...

    Personally, I don't think it looks right when a Slash wheelies. You never see the full size ones doing that... that's just my opinion.

    But I know it does happen... So to keep the original/scale...
  11. Replies
    8
    Views
    1,929

    A friend of mine had one last over a year. It...

    A friend of mine had one last over a year. It finally died about a week ago. I believe he cleaned and oiled it once or twice a week. I never gave my Titan a chance - went brushless on my stampede,...
  12. Replies
    18
    Views
    5,393

    Why WOULDN'T a coathanger work? It would be a...

    Why WOULDN'T a coathanger work? It would be a cheap and easily made sway bar. If it works, dont knock it. It doesn't have to be pretty, just functional.
  13. Replies
    6
    Views
    227

    The front is the same as the Rustler, the only...

    The front is the same as the Rustler, the only dofference in the front end is the axle(s), the Bandit axles are shorter than the Rustler's.
  14. Replies
    12
    Views
    267

    Tuning is going ok, considering that I'm a newbie...

    Tuning is going ok, considering that I'm a newbie to nitro-powered trucks. I don't think I'll be giving up on electric - I like the instant torque that the BL motors provide - but I don't think I'll...
  15. Replies
    12
    Views
    267

    It arrived yesterday and I wasnt sure if would be...

    It arrived yesterday and I wasnt sure if would be in "runable" condition or not... within 30 minutes of checking it out and [I]actually[I] reading the manual it was running.

    The front suspension...
  16. Replies
    12
    Views
    267

    Its nice to hear that they're good trucks, I'm...

    Its nice to hear that they're good trucks, I'm waiting for mine to arrive (hopefully early this week). I'm looking for something different to kind of "tinker with". I have a couple of BL trucks,...
  17. Replies
    5
    Views
    527

    I have those turnbuckles on both my Rustler and...

    I have those turnbuckles on both my Rustler and Stampede and would not hesitate to buy them again if I need them on another truck. They have taken more abuse than I could ever have imagined. And of...
  18. Replies
    7
    Views
    197

    The rear drivetrain from the Stampede or Ruster...

    The rear drivetrain from the Stampede or Ruster will fit on the Bandit. The only parts needed are the driveshafts, rear A-arms, rear camber links and front body mount. It is possible to just install...
  19. Replies
    9
    Views
    703

    Nope... not a Slash, closer to an e-Revo. It...

    Nope... not a Slash, closer to an e-Revo.

    It needs the front and rear bumpers from the Slash.
  20. Replies
    7
    Views
    330

    Try some traxxas 2.2 rims (P/N 3674) and some...

    Try some traxxas 2.2 rims (P/N 3674) and some Proline Dirt Hawgs. I have done this, they look scale and fit under the body with just a bit of body rub, and its MUCH cheaper than the $105 bead locks.
  21. Replies
    15
    Views
    2,088

    Looks good. I thought that the servo was...

    Looks good. I thought that the servo was vulnerable also... I used an Integy servo guard intended for the T/E Maxx.
  22. Replies
    10
    Views
    1,091

    I'm in Orlando too. Been looking for a good site...

    I'm in Orlando too. Been looking for a good site to bash on that isnt "posted". Where on Weatherbee is it? I work near the east end of Weatherbee, how far is it from Boggy Creek?
  23. Replies
    8
    Views
    760

    I would suggest running a Velineon 3500 with the...

    I would suggest running a Velineon 3500 with the MM esc. I had a MM5700 on my Rustler and it seemed to run hotter than the VXL setup no matter how I geared it. Once I swapped it out for the 3500kv...
  24. Replies
    11
    Views
    612

    I personally would not buy any battery through...

    I personally would not buy any battery through ebay. I have a friend that has purchased 3 on ebay, the first had a bad cell in it and the other 2 had no shrink-wrap - just glued together - and when...
  25. Replies
    10
    Views
    624

    I replaced the rear wheels/tires with the traxxas...

    I replaced the rear wheels/tires with the traxxas 2.2 rims w/dirt works that were on my Rustler. They look just fine and clear the inside of the fenders. I did this after I noticed that the VXL was...
Results 1 to 25 of 44
Page 1 of 2 1 2