Type: Posts; User: losi b
Okey dokey, thanks for that info Jakey.
I am looking for people that have raced using Hobby City batteries.
I let my packs cool for a while before charging. Thanks for the reply.
Fangs, the 8000 lipos have about 200 runs on them and they puff if I gear above 2.75/1 ratio. At that ratio my ERB is too slow to be on the track.
Just for an shot in the dark, I tried running some...
Come guys, flame me if you have to. Dont go at each other when someone is asking a question.(even if the question has been asked hundreds of times before) The verbal darts are the reason the threads...
Thanks for the replys. The reason I started a new thread is I got tired of reading pages of non-relavant info. I figured I would get flamed so no problems.
More to the point of my question, I will...
Let me start by stating thanks in advance for you patience and your help.
I am in the process of getting my ERB out of storage and I need to buy some batteries. I will be buying from Hobby King and...
Thank you guys, I really appreciate all of ya'lls help. The wheel and tire manufacturers sure have made it confusing.
Jason over at T&T hobby in Plano knew what I was looking for right away. Losi...
Here's my problem, I want to mount up some AKA City Blocks on my ERB and I am running into a wheel to tire mounting dellima.
Let me rephrase my question.
I want to mount some "AKA...
Thanks Slotterhouse but those are for maxx size tires. I am looking to mount up some truggy tires.
Anyone else have any ideas.
Does anyone other than Traxxas make a 17mm 1/2 inch offset dish wheel?
I want to mount up some AKA truggy tires and cannot find a 1/2 inch offset dish wheel.
Thanks in advance.
With 25/50 gearing and a Maxamps 2S 60C, the truck is great. It is stll pulling hard at the end of a 60 foot straight. It has great pop off of short aproach jumps. You can break traction on power...
I ran my Nue 1512 1.5y on 2s, geared at 22/50 a medium sized indoor track Sunday. On an older 3800 30c it was slightly faster than the VXL with 13/50 on 2s but planted the truck. No wheel spin...
Sorry about the odd description. That is what we have called them at my area tracks.
Over_Revo explained it correctly. They move the wheel carriers back, which lengthens the wheelbase. On the...
I saw Tim testing some prototypes of the mini froglegs at the track about a month ago. Is there any information when we might get them on the hobby shop shelf?
2 rear lower arms and center front driveshaft.
Traxxas Freak, the lipos are 3 year old airplane packs so no real improvement over the stock packs. I would say with a new lipo "high C" discharge pack you will get a noticeable improvement....
I ran my truck at Mike's Hobby Shop indoor offroad dirt track all day today. What a blast. I ran it on 1 stock battery with the supplied small pinion and it was very quick. I also ran it on 2...
I stopped by Pep Boys in Dallas today and saw 3 large Traxxas boxes. I went to take a closer look and saw some Traxxas parts bags about to go up on the shelf also. The vehicles were the Stampede...
I have been running the MMM and 1512 1.5Y/F on 2x 2 cell Max Amps 8000's. I have it geared 22/58 and temps after a 25 minute run (race conditions)are 95 to 105 ESC and 135 to 165 motor depending on...
Here is a thread from another forum that might help.
http://www.revo-world.com/forums/showthread.php?t=2778 Read post #12 by Tim.
I hope this helps.
Sup VXL? Brian from Mikes hobby shop here. We miss you at the track. When are you coming back out?
oh yeh, don't forget about those REVO carriers I loaned you.
I went up 1 weight on oil. I am running #2 variable pistons, 60 weight front and rear with orange and gold springs. Silver bars set at the very end of the bars.
I run the variable pistons with the Traxxas swaybars and it is easily the most agile REVO I have ever driven.
come on out to indy this sunday. i'll be there at 12.