Type: Posts; User: spencer_lee1993
Snook, looking good so far. What type of tubing did you use to extend the air filter necks?
Has anyone thought of just removing the threaded part of the hex? I was just htinking that if you cut off the threaded part and keep the hex, it would reduce a lot of slop... Thoughts?
Hey Revonate, I had the Ofna Force .28, great engine, lots of power, I didnt have it from new so I can't tell you how it was broken in or how many tanks it had on it. I ended up blowing it a few...
I just bought the buku, waiting for it in the mail now. Can't wait, but from what I read it is amazing
better off looking at the roto start
I am currently using traxxas 33% and my uncle runs traxxas 20 in his savages, we both find that their is too much oil in the fuel, causing gummed up OWB and such, we were going to go back to...
Great Question, I was wondering the same thing, cause the side blow pipes just work very good on the revo. From what I have read, because the header has the extra bends in it, it causes extra back...
Ok let me know before you buy cause I am interested. Already had a pin shear in the tranny so I don't think it would take much more with steel gears to tear the pin out of the shaft. Btw, what were...
Hey Al, I have been thinking about the RRP Steel Gears for my slayvo, has Dave from Buku been able to do anything for you regarding the shafts?
check out the servo section in the products page, it will tell you how much torque all the servos have
Okay, I have personal experience with the slayer pro, and I have done a lot of bashing with my uncle, who has a savage x.
To be quite honest each truck has its own pros and cons. The savage x is...
Soak in WD-40 over night and it will clean it really well. Then oil it with an above suggestion
I installed the front only for a time, just because I didn't have access to a drill. I did notice a big difference with the front on. I did do the rears, was pretty easy especially with the template...
Will you sell the 2 servos seperately?
I go tthe sway bars and it helped greatly night and day!
It depends on if you want to permanently remove them or just temporarily, for the latter just remove the retention ring by pulling it out of the wheel hub, it just kinda clicks inside their. So use a...
Ship to Canada?
Started with slayer pro
converted to Revo with:
Hey Snook, just going off of what RevoReaper said, I am pretty sure that Vantage Racing make Carbon Fibre rear spoilers, that would not flex at all and would be very light, something to consider, and...
I highly recommend that you upgrade the clutch, Al morancy over in the Revo forums has some great info on clutch. I know that he really loves the Buku Clutch and the M2C I believe it is. I am...
Get some contact cleaner and spray the switch, that will keep the switch working good, I had that trouble quite a few times and thats what helped get it going, I would like to just remove the switch...
Ha revo #2 is mine Sold Thanks!!
I run a 1700mAH Ofna Flat Pack in my Slayvo, lasts a really long time. I would reccomend it to anyone
Check out the proline website they have lots of different wheels and tires that may be what you are looking for
I remember asking you this in the past, but what was involved in making the Revo tranny a 3-speed?