Type: Posts; User: christyzheng
hi/ i have air leak need change bearing too, can anyone tell me do i need to change both bearing or just the outter bearing because inner still in good condition and the reason is hard to remove...
ya just tiny bit oil come through at bearing, not too bad. they have 2 bearing 1 outside and 1 inside do i have to change both because inner bearing still very good and hard to remove.
Hi, i have a question about my 3.3 engine. My revo 3.3 run fine but i find out the front bearing have air leak its that a big problem if i keep running or i have to change it?
thank you. will try setup again
factory setting for hsn is 4 turn right and how about lsn?
lean a LSN or HSN?
hi, i just brought a used 3.3 engine but as new and i went out for setup and my car cant idle properly, why? the idle speed like bit low and high when after full speed. its that the LSN need setup?
This is my babe
Forgot to say the weather are cold right here and the engine are nearly new. How the tune is the weather are cold? thanks
is used engine but been try 4 half turn and same. what wrong?
Hi, eveyone forget about the plug because just installled a 3.3 engine. Its that HSN 4 turn from close are rich setting because i need to retune the engine but the engine want cut out when WOT why?...
just find out it was the front bearing leak. just change the bearing will fit this problem?
so what i need to do rebuild the carb?
if air leak will cause burning the plug?
my truck was runring good i dont know why keeping burn out the plug. i been try the factory several time but didnt work.
i been try a rich setting and still burn 3 plug again. i think the engine dead. need a new engine any best engine?
Am i run the engine too lean, that why burn out the plug easily?
Hi, anyone i have a Revo 2.5r can anyone tell me why my engine burn the glow plug easily? Just burn 2 plugs in half tank fuel. It was run fine but in this 2 days been burn 4 plug. Please help me sort...