Type: Posts; User: John H
I had the same problem with my Ansmann wheels, so now i use a cheap glowplug wrench, like this one
You mean, taping is NOT 100% reliable, right ? ;)
Hehe, happend to me too, really good taped badlands, at 96 km/t the one tire got all the tape bunched up in the middle, and one tire just went,...
I have changed all my connectors to EC5 connectors.
They are very easy to solder even the biggest lipo-batteri-wires on, they are very easy to connect/disconnect and i think that they can...
I have bought a Dynamite 1/8 Buggy & Truggy Wheel Balancer (17mm)
Looks good, but is it not easy to solder such big wires and get them to fit in the Traxxas connectors, like you have done... i have switched to EC5 connectors, bigger contactarea and very easy to...
You can program the MMM anywhere with the Castle Field Link ;)
My E-Revo with about 60 cm led lightstrips :-)
I have upgradet my E-Revo with this:
Savox 20kg Digital Servo
Pro Line Single Servo Conversion Arm
Servo saver spring - heavy duty
both faster and more powerfull than the two servo's that was...
I have changed to EC5 connectors, they are very easy to solder even very large wire on, and they schould transfer a lot more power than the Traxxas connectors, and i have cut the vents so that the...
He says that he was running 18/54 gearing, and different tires , HoBao Racing Trapezoid , and then the 3s 3000mAh 25c lipo's , that helps alot, since they do not weight as much as 5000 mah lipos.......
(2) #5656 Summit Driveshaft, long
(4) #5654 Summit CV Stub axle
(4) #5653 Summit diff output CV drive
Did you balance your wheels ??
You can strenghten it like i did, it has taken some serious beating since, and still holding.
Going too fast ??? :lol:
Same here :cool:
Mine still works fine, after about 20 runs, i use 4s.
Yeah, its dangerous to run nimh with the MMM, you risk burning batteries, esc and car...
Since my first clutch burned out, i have installed mine like that , and it has worked nice since.
That doesnt sound good, but lets see, i got it cheap :-)
I am getting one of these in a couple of days
A short video from the first Traxxas race for the 1/16 VXL cars in Denmark.
Most of the drivers are driving their cars on a track for the first time here ;)
A bodyreamer makes nice round holes, that doesnt crack or tear.
They are all waiting on the updated Castle esc , i think ;-)
+3 here, protects really good, and acts as an wheeliebar too ;)