Type: Posts; User: Cwczx3
Went racing with mine over Thanksgiving. Some of these video's are better than the others.
My Focus body mounted.
Also ordered some focus bodies and my girlfriend also got a rally of her own to play with.
Here is how mine started off.
Didn't wanna trash the KB body and wheels so i switched them out to these for...
My buddy who is on here fully submerged his then used a garden hose on it to remove all the mud then we open it up and dried it out with a heat gun and it fired right back up to life. we were shocked...
i was running 22t pinion and a 62t spur with no troubles at all.
I used a y harness which also lets you turn the servo speed all the way up.
I use an old exacto blade the has just the very tip of it busted off works quite well.
Does it come with the screws?
22t pinion 54t spur using *****-h 6s 5000mah
Here's a video from the other day. Ran it outta range so i had to stop the video. this was at 61mph but the top speed that day was 63.5mph.
Ran mine yesterday geared 22t/54t and hit 63.5 on badlands LOL!
this was badlands on half ups with j concepts yellow foams. not sure what happened but the tires werent ballooning. Should have waited to get some phaltlines but the temptation was too great.
well went and did some speed runs hit 63.5 but three of the four foams rippped inside the taped tires. so what causes the foams to break or tear inside a taped tire?
sounds like your gear mesh is too tight.
Do you tape just the tire or do you tape the foam as well?
Got my wheels today and the lpr's are the same as the half ups as far as diameter and width.
If its a white porcelein top stove the dye wont affect it.
i use the liquid rit dye and a pot like this mix the dye with some water bring it to a boil then turn it down to simmer. put the wheels in two at a time for 45min to an hour.
Yep you can dye them any color you want i just did a set in black and they turned out great.
He asked how many Nimh so i figured he was referring to the aa's.
I think he wants to know how many AA's go in the 2.4ghz transmitter.
duratrax deluxe car wrench works well.
I believe that most are running the HPI Phaltline tires and rims. I got up to 56mph using the stockers on 20t/62t but man were they ballooning like crazy.