Type: Posts; User: edge0877
this is what it does not all the time just some times and i'm starting to think its the reciever because it cut out on me completely today between 75 and...
this is for your part numbers for single motor plate and cover / mmm mount
you'll also need whatever connectors you want to run maybe...
sorry about that i really didn't list my setup did i
i've got the mmm with the 2200 neu/castle motor
spektrum dx3.0 with the sr3000 rec
currently running venom 2s 5000 20c with 30c burst
venom 3s 4000 or venom 2s 5000 (pairs of each of course) traxxas plugs
spektrum 3.0 none of my wires are braided but i do have some excess wire neatly zip tied from the esc to the reciever
so i was out doing some speed runs yesterday and my e-revo seem to sputter or glitch under heavy throttle what could cause this ?
thanks for all the help guys really appreciate it
That's what I'd like but I already had one vxl and got the other on the cheap cheap
Just curious I've seen them setup differently an I just wanted to know what works and what doesn't or do they all work
ok thanks that makes good sense so will a harness work with only the positive or negative lead bridged and not both?
i have seen 3 different harness config's for the unslow one with both leads bridged (positive and negitive) and the others have only the positive or negitive bridged
my question is will all three...
thanks guys lots of help and info to consider i really appreciate all of it i think i just stick with the stockers and see what happens
sorry wasn't trying to be rude just not good at waiting for answers
36 views and not one response thats a first
are those the stampede front and rear shocks by integy?
does anyone know if jato drive shafts will work on the slash i was thinking of upgrading to cvds after upgrading to brushless and hearing of twisted stock shafts on others brushless rigs and where...
ok im thinking 8c spc 1.230+ 7c flat with a hump and vxl sys
well it looks like the fan favorites are spc and maxamps with spc way out in front
titan 12t, xl5,7c 5000mah, 18/86 = 21.2mph (3/4 charge on battery when tested)
thats o.k. that's exactly what i want a conversation about who's the best i know theirs know definite answer
i'm looking for the very best 7c - 9c NiMH money can buy i need some opinions anybody got one
not sure the amp lights start blinking shortly after it starts charging and i tried three or four times no change
thanks for the help i did charge one pack but the second won't charge it reads like its damaged and the slash is awsome
7 cell and nimh yes not sure on 5000
i got trinity 7c 5000mah packs with my new slash but the directions say to charge in linear mode (never heard of) and i have a vision peak 2 charger is that going to work?
Ti everything including all gears