Search:

Type: Posts; User: SirJaymz

Page 1 of 17 1 2 3 4

Search: Search took 0.03 seconds.

  1. Thread: LIPO question

    by SirJaymz
    Replies
    16
    Views
    1,871

    So what we all need to do is By LIPO's now so...

    So what we all need to do is By LIPO's now so that later we don't get burned from the shipping?

    Or do you think a year from now LiPO's will be out dated and the new batt. of choose will be LiFe?
  2. I am liking what I am hearing about the HW ESC, I...

    I am liking what I am hearing about the HW ESC, I have been wanting a Tekin, as I hear they are very smooth, and I already have a MMM,

    I have 3 trucks, I might buy all 3 and see which one works...
  3. after much searching-- I need to know what esc/motor combo

    Hey guys, I now have a 4x4 slash, a e-revo, and a e-maxx, I need a esc/motor combo for each, after searching all I see people running is the MMM and the tekin setups, I already have a MMM that is in...
  4. Sorry to bring up an old thread, but i wanted to...

    Sorry to bring up an old thread, but i wanted to up date my model list and I thought this would be a good place to do it, in part so I could see what all I have bought and why my rent is pass...
  5. Replies
    402
    Views
    42,949

    +1 for wanting 1, I'll spend $30 maybe $40

    +1 for wanting 1, I'll spend $30 maybe $40
  6. Replies
    11
    Views
    2,325

    Mine came with a castle link--Thingy-- just plug...

    Mine came with a castle link--Thingy-- just plug it in to the receiver wire, make sure the upside down "u" goes to the orange wire, and connect it to your laptop, using the NOT supplied "usb-to-mini...
  7. so the BIG 1580 motor Will be a better choice, ...

    so the BIG 1580 motor Will be a better choice,
    would it fit? It is a good bit bigger than the others
    Motor Diameter:
    45.95mm
    49.95mm with fins
    Motor Length:
    85mm
    Shaft:
    5mm
  8. I did fine why the MMM went up in smoke, My...

    I did fine why the MMM went up in smoke, My Kershaw Motor Died, I a an Industrial maintenance tech. so I assume that dc 3-Phase motors are close to ac 3-phace motors, if so the I dropped a leg on the...
  9. ok I got an email from Castle today, they are...

    ok I got an email from Castle today, they are going to replace my ESC but they are out of stock and will have some more in in 3 weeks :(

    Till then I will be running a VXL system in the revo,...
  10. So with 3's you would see higher speed, but have...

    So with 3's you would see higher speed, but have less punch?
  11. Replies
    35
    Views
    6,033

    were at in Louisiana? I am in Monroe

    were at in Louisiana? I am in Monroe
  12. Replies
    33
    Views
    2,109

    I enjoy my slash, I break stuff all the time, but...

    I enjoy my slash, I break stuff all the time, but It is my fault!!! I bash very hard, and The truck has only seen 3s Lipo's I do think Traxxas was off just a tad on there design in 2 places, The...
  13. Well I should not have read this...

    Well I should not have read this thread.........seems every time I read a post of the forums and say to my self " That could never happen to me" and I read it last night, and I get up this am and...
  14. Thread: Gearing

    by SirJaymz
    Replies
    8
    Views
    1,919

    I am no expert, But, gearing a brushless motor...

    I am no expert, But, gearing a brushless motor for speed(higher pinion) make the motor work harder therefor draw more amps, with more amps comes more torque but more heat! and shorter run times.
    ...
  15. Thread: Gearing

    by SirJaymz
    Replies
    8
    Views
    1,919

    What you are looking for is smaller pinion and...

    What you are looking for is smaller pinion and larger spur gear,

    16/58 will be punchy a would be 15/68 a bit more but You'll loose more speed

    TO find what you are looking for just divide the...
  16. Replies
    8
    Views
    735

    I have been thinking of a Fail safe, like this...

    I have been thinking of a Fail safe, like this one http://www.venom-group.com/itemdesc.asp?ic=0605

    They are for the nitro guys, but I think they would work the same for us, just set the temp at...
  17. Replies
    15
    Views
    1,797

    I have been thinking of a Fail safe, like this...

    I have been thinking of a Fail safe, like this one http://www.venom-group.com/itemdesc.asp?ic=0605

    They are for the nitro guys, but I think they would work the same for us, just set the temp at...
  18. Replies
    13
    Views
    2,546

    yes just tried it, I was running 12/68 no heat...

    yes just tried it, I was running 12/68 no heat issues, but I was using smaller tires, Pretty happy with it, it is no were near the speeds of my MMM but a Lot more fun than brushed.

    AS for whether...
  19. 3s 5000 30c Blue, 2s 5000 20c SMC

    3s 5000 30c Blue, 2s 5000 20c SMC
  20. yes after it caught fire, the positive wire had...

    yes after it caught fire, the positive wire had come unsoldered, sucks bad man I was really liking the speed, I do believe I will be replacing it with the Tekin rx8


    so do I do a warenty though...
  21. The grass in my yard is VERY short and almost...

    The grass in my yard is VERY short and almost dead from lack of rain, after I let is cool down I installed installed a new motor and a (1) 3s battery and tried to run it, It went 4 foot the cogged a...
  22. it did thanks! so now for my next issue, I was...

    it did thanks!

    so now for my next issue, I was running it in the yard on 4s, heat has been fine for the last 2 days, today I got about 1/2 battery pack though and the thing cuts off.....I run over...
  23. New to Revvo's wanted to say Hi! and a couple quick questions

    Hello everyone, i traded my VXL Rustler for a e-revo 2 days ago, went straight home and pulled the MMM and Kershaw 9l out of my 4x4 slash and installed them:D I really like this truck and so far I...
  24. Replies
    7
    Views
    471

    I be honest, the battery is a 2s 1000MaH that...

    I be honest, the battery is a 2s 1000MaH that cost $5 from ____.com
    Think he should just trash it?
  25. Replies
    7
    Views
    471

    easy and quick LiPO question

    Hey guys this will be an easy one,

    a buddy of mine over discharged his 2s Lipo's by accident.

    now the charger won't charge them, says "under voltage"

    how does he get them to take a charge?...
Results 1 to 25 of 401
Page 1 of 17 1 2 3 4