Type: Posts; User: kdog
i wash mine with soap and water. You can brush paint but its hard to not have brush strokes. If you have a hobby shop look for tranparent paint colors Tamiya makes them or mix some future with...
only thing i added to my install was that i added some heatshrink over the axle cross bar thing incase the grub screw ever comes loose.
a arm then a shock cap
can the motor heat up from lower cell batts
I use a Thunder AC6 with no problems for my Lipos or NIMHs for 50 bucks you cant go wrong A buddy of mine went and bought a venom charger for like 130 bucks and its the same charger with different...
I run that same battery on my 2400kv with no problems
no heat issues but i do not have a temp gun I love running it because its just fun!!!!!!!! Plus im running 1/8 proline knucklers on it.
I have had zero cogging with my 2400kv. It really zips on 3S and Im running 18/54.
THx for the coupon code!!
I keep seeing folks talk about using WD 40 on the bearings. Its a rust remover/ cleaner no t a replacement for iol or grease.
I have used all types and Acer Goo has worked very good. Im going to...
i use a weller sp80l wide tip does a great job
Here is mine SCT MMP 2400kv with 1/8 wheels Knuckler 2.0 tires and im using Losi Strike shocks. So far very happy. It a Truth body but I have a Raptor one on the way so ill post it again once its...
i use the adaptors now first runs today and they worked great
The motor mount upgrades are for the use of a larger bearing. It lasts longer and causes less drivetrain issues. I do not think you can gear the same for 2s and 3s unless you keep it stock gearing.
Take out a loan!! j/k lol Go have fun and if it breaks replace it with RPM parts. Once the center bearing starts goign get the Kingheadz or FLM motor mount. Till then have fun!!!!!!!!!!!!!!!!
i just made sure mine were slide all the way to the sides no binding on mine
the exploded views are what you need
I just happened to change my rear dif oil last night. I put in 15k oil to replace teh grease that comes stocks. I turned my left rear wheel and hte other side turns the oppisite direction. Same...
I run Teknos but a buddy runs x-duty MIPs with no problem and hes running a MM 2650.
And I also spend what I want because its my stress relief I just run the crap out of my truck and hit things...
Castle's MMP + 2400kv then
I have both the 3800kv and 2400kv Castle systems using the MMP. On 2S gear rright the 3800kv is what i would say is a good racer with tins of speed and no heat. the 2400kv on 3s is just plain fun...
To me and my experience working on or fixing the truck is 50% of the draw for me. There is always something to fix, adjust, or just figget with.
I use ACER GOO. Its great i only change or repack bearings aboutonce a month if Im bashing really hard.
Also I use Moo slick and love it. Its the only thing I can find that repels the moon...
im in Iraq and i use the same Tower, A main, LiguidRC. I have yet to find the one stop shopping. For big purchases i hit Tower because i joined the membership adn you save big on some items. Also...
^^^^^ concur fully ^^^^^^^^^^^