Type: Posts; User: egnjohn
I just painted a rat rod body and wanted a flat finish so i sprayed inside and wet sanded the outside of lexan. I worked real good for a flat finish.
I finally got some time today to install bearings. I could only replace the one on shaft end, The other would not come out for nothing under the sun. I got lucky because after hookin it up to the esc...
Chrig81983 Thank you for the pics!
Also thank you to everyone for adding to the post. This was my first post in revo forum, It is grreat to see there are alot of good people here.
I have 17 pinion with stock titan, no problems.
Chrig81983 can you send me the pics, from the sound of the posts I will need them.
Will need to get the glue for new bearings?
Wow this sounds like it could be a pain in the butt to do.
I just ordered boco ceramic bearings.
My cc 2200kv motor (green can) is very noisy so I assume it is the bearing wore out. I have had it it alittle over a year so warranty is out. I went to castle to get rebuild kit and found it is...
47 yrs old
Married 20 Years
Traxxas Brushless Erevo
Traxxas 4x4 Slash
Ok thanx Jimmie, I will stay with one 775.
Thanx Guys, I assumed the 775 was better than two 550's but wasn't 100% sure.
Would it be worth it for me to get a second 775 and have two of them in my summit. I will already have the mounting...
i ordered a e-revo that has two titan 550 motors in it. I was thinking of putting them in my summit and install the mm2 2200kv i already have in the e-revo. Do you think two 550's would be better...
mm2 does not cog at all. No heat on 4s little heat on 6s.
I tryed to dye the servo cases two times and they would not take the dye at all. I wound up painting them. I have run the truck several times and the paint is holding up good.
This post might help you.
Not sure if the alunimum shocks are of any benifit other being harder to break, the springs are a benefit because they are stiffer.
The Mamba Monster 2 is super awesome, love the extra power. It...
They are the Traxxas GTR shocks the springs are Traxxas double blue that I painted black.
Last weekend I broke both front and rear bulkheads, and since most of truck was taken apart to replace I decided to dye the chassis black. I think it turned out really good, what do you all think?
I kept stock spur 68t and changed the pinion to 17t
Castle Creations 1/8 MAMBA Monster 2 25V WP ESC, w/2200Kv motor
Traxxas Aluminum GTR Shocks
Hot Racing aluminum suspension arms
Hot Racing Aluminum Knuckles-Axle Carriers
Integy Aluminum Shock...
I have the mm2 with 2200kv. I chose 2200kv because you can use 6s. The 2650kv has 4s limit.
Body isn't as nice as other pics. Alot of the black paint is gone and there are quite a few cracks in it.
I did lower it with e-revo bumper mounts since that pic.
Proline f650 is an exact fit.