or from michigan
Type: Posts; User: lestatsghost
or from michigan
my LHS's are the same they have been 199. haven't changed.
I am using an original sport body on a rustler if that helps. only mod you need is to put the lid on the chassis.
do you want to lock it? or are you actually having a problem keeping fluid in your diff?
to me it sounds like you may have messed up one of the batteries. since it looks as if you have am ammeter CHECK EVERY CELL seperate + & - on each cell. then start adding in one at a time eventually...
here is what traxxas has posted on the mini slash
to me since it is 4wd and based off of the revo it is a mini...
i'm guessing you mean it wobbles? look at the stub axel my be bent. or barring is just blown apart. i have had both problems.
take sandpaper to your bead area on the rim then glue. it will give a better area for the glue to stick to.
freak, good thinking. an electric motor is just like an alternator in your 1:1 regardless of either brushless or brushed. but your right the charging of the battery would take crazy wiring unless...
buy a robinson steal spur. you need 12 pegs though but you will not strip this gear. if you don't mesh the spur and cb correctly it will eat your cb. mesh how the instructions tell you and you will...
jd said it just get proline rims that are for the rear of traxxas nitro vehicles and you can use those upfront too. same size hex 12mm.
sounds like a tranny adjustment needs to be made. check your owners manual it says how to do it
I put a 72t robinson steel spur in the wifes n.pede with the stock cb and the .15 and that will lift the tires. softer in the rear is better it will squat rather than roll
mine is 8 years old. haven't used it in about 3 years didnt have anywhere to use it or put it so I stored it at my parents house for a while. finally 3 years to the day later I will have it again.