Type: Posts; User: kingspyro
ive been having problems starting my revo 3.3 and revo with a 0.s 21.any one has had problems with monster trinity 20% nitro fuel??????
whats a good brand for vented clutch bell or is the rrp a good one obviously i habe to buy a new one
i am looking into them just dont know which one to choose? ...
pretty pricy though anything less expensive
keep burning the traxxas, mip cutches and i have tried the integy 3pc clutch and lasted a little long . got the o.s. 21tm engine rrp 15t clutch bell and 38t spur on proline threnchers.
ill look into powder coating
sand it down first.
hey i got a revo chassis i want to paint for my wife. And i just want to know what would be a good brand of paint that wont get ruined if nitro fuel falls on it???????
i was thinking of touch up car...
ok then ill play around with the spur and pinion and see
ok if i have a temp gun is it the motor or the esc temp that im looking for?
got a merv with a 1/10th castle sv2 5700 and a 1/16 slash with the 1/10th traxxas velineon both running parallel 3s 1400mah lipos. whats the best spur and pinion to run on them.on the merv it has a...
Ok ill go with the pink blue but is a 2oz bottle of shock oil enough for both trucks
i got a merv with a bb with gtr shocks and green springs and also a 1/16 slash with a bb ad full merv suspension with gtr shocks and silver and green springs . now my question is what weight and...
never really thought about it but make sense ill try it parallel and see if they stay cool
I also got a a 1/16 slash with the traxxas 1/10 brushless motor and esc and that one I.still burn spur gears but the esc is cool but the battery still gets really hot
No just a single 3s Lipo and it get very hot almost as hot as the esc
Another thing is my lipos get really hot after I run my merv
. That's what I was thinking because it beeing too loose its was causing the slipper pad to whet so hot it burns the spur gear
3 cell lipos, and I mainly use it on dirt, grass and stock tires also I keep burning the spur gears the slipper pad gets so hot it spins and I have it as.tight as I can , ill double check the pinion
I have a merv with a castle sv2 5700kv in it and my esc gets really hot I'm running stock gearing I believe 45 spur and not so sure on the pinion
yes i want to add the biger 1/10 motor
what do i need to buy to mount the sv2 motor
Yeah just unplugged the servo and still no difference
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXXWH5&P=ML. Is this the esc that will work? And I'm still new but do I use the stock motor?
good thing I asked I almost bought the micro esc