Type: Posts; User: Little Smokey
RPM arms ( & other stuff) can be dyed to most colors
The servo wont start acting right with the NiMH. It sounds like it may be water under the bridge.
Smoking is bad, mmmkay.
Looks good! More pics please!
Q1) I've seen an antenna option that replaces the plastic tubing with a flexible spring so you can have the range to flip it belly up while doing 45 mph from 300+ ft away and not have to worry about...
Ive been wanting to build a trailer lately. Is the winch run from the Tx?
Looks good & strong now!
I was wondering the same thing...
Subscribed - I tore mine down to dye everything black, after rebuild mine is pulling similar shinanigans. Except for the push to start. All bearings are new, I also shimmed the diffs and installed a...
Your cousin would be darn proud! Looks great man.
A 60w iron should work. I started soldering with a budget HF iron. Hopefully someone chimes in with a solder search link or some 60w experience. I would have to recommend a tk-950 soldering station....
I vote for the 700r4
t bone bumpers and skids
Kick the stock servo to the curb and use the hitech servo
What batteries are you running? Long and short of the answer is probably to tighten the slipper clutch. Make sure your throttle trim or sensitivity (cant remember rite now) is set to max. Possiably...
I second the SPC recommendation, they make quality stuff.
Depends on things like, what rear end gears are you running, what size tires & what is the intended use of the vehicle?
yep, that there's the ticket.
My first legal job was at a local printing shop with my Father. I came in at night and put the paper away from the daily deliveries, emptied trash cans, janitorial, kept the copiers filled with...
A nice palette cleanser! Lol, Maggie!
I got 8000mah batteries not realizing how thick they were. I was new to RC and wasn't sure how to strap the new Lipos in. Eventually a few wrecks, a lipo got loose, then puffed. I believe if they had...
I ran my 3903 bone stock with 550's on 2s 8000mah Lipos for a while without hear issues. Ran = past tense. Lesson learned = get hard case next time... expensive mistake ...
Is it possible a channel 2 went bad on the rx?
Looks good! I like the interior. Good idea!
Correct. Green LED means LVD is on.
Try to unplug the battery(s) to shut the rc down rather than pushing the button on the ESC. They are a known weak point and the less use the better.