Type: Posts; User: slash-4x4
Waterproof it!!! Throw on some liquid sealer such as (liquid electrical tape, plasti dip) NVM the warranty! Thats what im doing ;D
OR if you so worried about warranty, go on youtube and search...
what about Lipo's?? ANything to do to those??
Those are 3S?? 11.1v and 2200Mah!!?? if that true and fits, I think the tight fit is worth it
I have the SV2 and its great! How/where do you run ur Revo?
Bash? top speed? what is ur driving style
i went through 3 traxxas servos before i bought the *******. I did have some water water runs mixed in... Had No stripped gears, they just went dead.
and you need the screw for the servo. I bought a package have a couple extra if u need the screw PM me and ill put one in an envelope and put a stamp on it.
Yea i sanded before and it still scratched off nicely. So I suggest giving the Latex a try.
I painted my dished wheels, and it lasted a god 2 weeks of running. Easy to do, so I can see re-doing small painting like wheels but trying to do touchup on EVERYTHING that gets scratched? uh yea i...
Normal running temperature should be below 200 which is the thermal shutdown. Ultimatly you dont want to go higher than lets say 180...
You are plugged in in Series, so high voltage. I think it...
I went through 2 already. I still have on laying in my garbage... I just threw it out 5 minutes ago... Why DO they break??
the screw that screws into the servo? Ill send you one if you wish.
There has to be some other waterproofing material that I can use. Im 99 percent sure that i read somewhere in these forums about a spray like Plastic Dip but it peels away, so its removable.
OHHHH. wow. Crafty. Yea that might not work with the balloon on. Hmm.. I guess i can try. Any other Ideas?
The ESC wasn't flush with the battery door. I use Velcro on the doors to hold the body so thats why i flipped the receiver and ESC. Plus I do have a big block which I might install at some point.
serious? dont insult my intelligence. It fits in the balloon but not in the battery compartment.
Cleaned up the Receiver Box...
I just finished ^^^ all that. I just hooked mine up. I LOVE the break on this!!! Not even gonna big block it just leave the stock motor. :)
ABEC 5 huh? wow. I just bought some bearings, they look exactly the same but are abec 3 and not stainless :-D
I think abec 5 is an overkill.
Yea I imagine a mesh is easy to clean compared to all the corners and crevices of the chassis.
How is it held on to the body?
Do you put a body over it? or how does it work
Something like this...
Yea i know they dont make one for the 1/16 scale, but it CAN exist.
Im just trying to think if the air will pass...
I, like many other people had RPMs installed and changed to alloy because of the pivot balls popping out. I changed them to HR. However I feel like they are either too tight and it hurts the up and...
Yes indeed. Remember you will need a better servo or dual stock servos sonner or later running the heavy tie rods.
I need your help! Right now i have this setup:
RPM and HR knuckles
Stainless Stell Turnbuckles
2 traxxas 2080 Servos
Anodized GTR shocks with black springs...
Heavier differential oil, or just making sure the diffs have some oil since they leak.
Get a center differential too :)