Type: Posts; User: Doubleu
Thanks for the info DG
So what is a good glue to use, super glue?
Does anyone know off the top of there head how long the front and rear shocks are? Got a gift card and thoght I would use it for some new shocks. Been thinking of getting the gmade shocks and wanted...
I thought that gluing them in without the grub screw might work, but wanted to test the waters to see if anyone had tried this method. Big thanks to all with the help!
They are the newer metal ones with the grub screw.
Does anyone know of a good way to prevent stripping the wheels. I have new mashers on desperados with the steel mip hexes. Dont want to strip these. I stripped out the stock talons. I do use blue...
Just wanted to wish you all a happy fathers day!!!!
just got back from bashing and they do not rub, but they grip alot better than the talons, these things are awsome.
some new paws today along with the body lowering kit. Cant wait to try them out, since i stripped two of the factory talons. Its been a couple weeks sice I have been able to do some bashing.
esc cooling fan
motor heat sink and fan
mip axles or tekno
That would be all you really need to upgrade, the rest you can upgrade as the stuff breaks. Also get a temp gun to see...
Same thing was happening to me, and figured out that I had stripped out the hex on the wheel.Had MIP shafts and hexes, so it stripped the actual wheel.
would sell the mashers seperate?
The slipper clutch was the first thing I checked, it is good, I also upgraded the slipper to the revo slipper.
I was out bashing the other day and notice only the front wheels were turning. Today I was able to take it apart. I rplaced the motor mount bearing cause it was trashed. That did not fix the problem,...
I have a pede and my buddy has a slash. When we go out to bash he always wants to drive mine, But if I was going to the the groomed track I would rather have the slash. The pede is fun on the track...
You can move the bottom shock postion inboard a hole or two, this will make it ride higher. I did this on mine, it made it ride 1/4" higher than stock.
could be your gear mesh also.
If your going to run 3s lipo, then I would foresure get the MIP x duty axles. The first 3s lipo pack I ran stripped my rear output yolk. It was shortly after that the front went aswell.
Thats what I did. Ran it to the reciever and pluged it into the battery port.
Here is the one I use.
It is plastic and will melt.
I kept the stock shock bodies and put alum caps on. I also put the red medium integy progressive springs on. I kept front locations stock and moved the rears in one hole on the the bottom towards...
I will take the big bores for $25 shipped. Pm me to work out the details.