Type: Posts; User: Jim V.
if you can fry an egg on the esc it is too hot :):):)
I think you are wrong, think about it. the way the shock is mounted stock, the piston is at the bottom of the shockbody so the air in it is at the top...because air rises to the top (your own...
Sorry for the late reply but i just installed a set of MIP's on my rustler and found out the axles are way too short.
the dogbone falls out of my drivecup. anybody have had the same problem??
aren't these tanks alot higher then the stock tank?
i tried a kyosho DST tank myself but it was in front of my slide carb... i couldn't refit the linkage because the tank was too high.
Place them on a shelf.. longest lasting Titan
Both the Promatch and the Venom are 7cells .
Why should the Promatch be faster?? Same capacity IMO.
I think the runtime will be longer and thats it.
FEATURES: Charges 4-7 cell NiCd or NiMH (4.8 - 8.4V) cells with a capacity
range of 750 - 7500mAh
Compatible with AAA size cells up to the highest capacity sub-C cells
And Brushless perhaps...
Adds a lot of fun
LRP is one of the top brands here in Europe IMO.
My Slash is making a grinding sound too , in my case it is just sand in between the pinion and the spur.
Still driving it and still goes strong though.
Did this and was an improvement.
Switched tires to opposite sides and even better, i know the tires are supposed to be directional but they grip better now..
AHHH TNX Konaman....
I see i have the original Slash...
New ones look great though, but mine are still ok, will be replaced by some Proline's soon...:)
Does anybody have a picture of the "original" Slash tires??
I own a Slash but the tires on mine are the only ones i know...
What is so special/ different about the "original"ones..
Why didn't you buy a seal???
They love water and are fast :)
Anyways, i didnt know the brushless motors where waterproof..
The LRP ESC is a good one but can't help on the gearing.
The 8.4 could be a NimH battery.
I use one myself ..
Only thing is.... with a 3s LiPo the ESC wants to burn out...
Happened to 5 friends of mine who had this system in a Rustler VXL.
How long are the 8ight shocks?
I have a set of Inferno ST-S shocks i want to put on my slash, only thing is that i think the springs are too strong..
Really don't know m8.
the pages won't open.
NP, M8 just asking around..........
Ill try a few options....
So what gearing do you think i would consider?
And the weight is only a kilo heavier then the miniLST2
Stock spur and a 15 or 13 pinion?
thats what i was thinking (bout the VXL and Castle motor)
So i should be fine with the stock gearing??? maybe a 15 tooth pinion?
What are the maximum temps the motor and esc can handle?...
Tnx for the info
@Cainam, I forgot to mention that the Brushless is a 540 brushless motor for a 1:10 scale car.
I used a shoehorn to put it in my miniLST2 :)
The motor was used in a Tamiya TT-01...
There was a bit of smoke so i immediatly disconnected the battery.
I think i can say i am a lucky man.. :)
I just got my Slahs delivered today and was wondering....
I have a spare BL with ESC which is a 2turns 4750kv .
Will this be strong enough for the slash?
I used it on my miniLST2 and that...