Type: Posts; User: samintrepid
Wow, this belted tire should be good for 100mph+ and very beautiful body paint, the car look scale (real car) with the proline body and the low profile tire :)
For 2-3S lipo I run the vector 4000kv and on 3-4S the ********* 2650kv
I think i would try with standard bearing and if he won't hold i will rebore to 19mm (diameter) and 5mm deep the motor mount with a cnc milling for accept bigger bearing 10x19x5mm or i will ask to...
30 min run at the sand track and this small bearing 10x15x4mm are full of sand and locked
The ********* motor run very smooth for a sensorless because he as 6 poles but he need 4S lipo for hitting 60mph, with 3S and 17 tooth you could run 45-50mph
Thank you, I like the color of wire me...
The stampede/slash/rally 4X4 come with jato clutch, the revo spec clutch is bigger, same size of pad but bigger pressure plate
The stock tire wear very fast on dry asphalt, on wet asphalt it another story, I wll put my 17mm Teckno RC hex for my next tire
Hobbywing have 2 same esc : the waterproof and the no waterproof
What is the size of bearing in the motor mount, it is the same cheap bearing 10x15x4mm or big 10x19x4mm ?
Thank you wyd10 !
I will put the evolution of my rally project here, the first mod was the esc motor a 4168 2650kv 6 poles and a 4S ESC waterproof, revo spec slipper clutch + aluminum pad, robinson racing 17 tooth...
I have 2 questions for you wyd10, could you put a mamba monster (4274 motor size) on this frame just like the original slash 4x4 or you are limited to 36mm can ? In the picture I see a center diff...
Next time I will put protection cover or never return to this track :cool:
I wash the truck with the hose garden and put wd40 on bearing after that but I will restore and change the wrong bearing before intalling my new motor and esc.
And yes the ESC was waterproof, I...
The weight as double 12lbs +, I wash directly with the hose and wd40 on bearing after that :)
The savage xs is geared for 2S but if you put optional gear you could run 3S without burn the motor.
I running 1 pack (30 min) at the sand track of my friend. The bearing in the slipper was locked after that (full of sand). The slipper was not well sealed, because it let enter the dirt :O.o:
It is a Castle Creation motor and ESC, not a factory traxxas motor !
All it ok, I just check the spur gear and pinion. I think the sound come from the tire during fast accelaration.
The ESC have a heat protoection at 170 degres and he dosen't kick off, I think the temps after 30 min on 3S without a heat gun is approximately 160 degres with finger
The tire holding very well at hi speed and do not wear fast, very good tire for RTR !
The car are very stable at high speed, very fun to drive i don't regret my buy. I am running on 3S 4000mah 40-80C (30 min run time). I receive the car yesterdays, 1 hrs after that the car was...
I am running the Vector 4000kv with vapor ESC on 3S lipo without over heating with the stock gearing 13 tooth pinion, For the summer you need a fan on motor. But if you want running pack after pack a...
Very clean conversion, did you have tightening the slipper nut for your Tekin motor
- Aluminum bearing adaptor for slipper
- tekno rc M6 drive shaft front and rear
- motor 4268-2650kv with 17 tooth pinion and Vector 4000kv with 13 tooth
- Battery 3S lipo 4000mah 40-80C