Type: Posts; User: ozman-sa
i know,my first esc went within 3 days on nimh in series. luckily they replaced it at my lhs and now avoiding running is series,so now running 2x 2s 2200mah lipo's. Only problem is to get a bigger...
cool thanks for the reply guys. rather just stick to what it is made for.
Is it possible and what do i need to do?
Have a stock brushless system. Is it possible to run it in series. I have 2 x ******* 2200mah 2s lipo's,wont run it is series for long,just want to do some speed runs.
air compressor! I usauly just take the motor and esc off,hose it down and clean afterwards with the compressor.
what size battery though,i dont want to damage the esc ,butt still want some decent speed? Parallel.
what would be the best batteries to run on a stock erevo vxl in parallel?
What is the best set up for doing jumps,my car keeps on flipping backwards and landing on the roof,am i doing something wrong?
Accelerate when jumping or speed down before jumping? Shock...
where do you get the wheely bar from?
What will be the best way to stiffen and get my suspension higher. Stock springs are not that good and @ss hangs on the ground even tightening the rear springs as much as possible!
@ RC FAN.Where did you get that front bumper from?
Should I just run one batt at a time or two in parallel?
I have a stock Merv vxl.
What LiPo setup will be best to run this in parallel?
I will be adding a heat sink and fan to the motor.
So is it just a different heat sink on the ESC then? Or do you just use a heat sink on the motor?
Thanks makes sense. Thanks for the response.
One last question about the cooling fan,do you have any suggestions on that?
Hi guys,got mine about two weeks ago,just running 2 standard batteries with series conection. My esc gets very hot,not helping that we have 35 and up degree weather the last few days in South Africa....
Hi guys,can any of you please help me out.Ordered a vxl-3s cooler fan,but realised I have a vxl-3m.Is there any way I can make this work and how?
Hi guys,i'm pretty new to the world of the merv's. I just bought a vxl-3s cooling fan,but only realised afterwards my esc is a vxl-3m. Is there any way I can make this work and how?
Help is needed.